Mazda 6 Owner's Manual page 445

Mazda6_8CJ2-EA-12C_Edition1 Page445
Monday, January 30 2012 10:10 AM
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
NOTE
To replace the bulb, contact an Authorized
Mazda Dealer.
Reverse lights
1. Pull the center section of the plastic
retainer and remove the retainers, then
partially peel back the trunk rear trim.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
Form No.8CJ2-EA-12C
Removal
Installation
Owner Maintenance
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
License plate lights
1. Pull the center section of the plastic
retainer and remove the retainers, then
partially peel back the trunk rear trim.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
Maintenance and Care
Removal
Installation
8-47