Mazda 6 Owner's Manual page 326

Mazda6_8CJ2-EA-12C_Edition1 Page326
Monday, January 30 2012 10:10 AM
Interior Comfort
Bluetooth® Hands-Free (Voice Recognition)
NOTE
A device can be programmed only when the
l
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving -
pair up your device before you start
driving. Park the car in a safe place before
programming.
®
If a Bluetooth device has already been
l
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
®
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
l
®
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
1. Activate the Bluetooth
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
3. Say: [Beep] Setup
6-102
Form No.8CJ2-EA-12C
4. Prompt: Select one of the following:
5. Say: [Beep] Pairing options
6. Prompt: Available options are: Pair,
7. Say: [Beep] Pair
®
8. Prompt: Start the pairing process on
9. Using the device, perform a search for
NOTE
For the operation of the device, refer to its
instruction manual.
®
application of
10. Select Mazda from the device list
11. Input the 4-digit pairing code to the
12. Prompt: Please say the name of the
13. Say: [Beep] XXXX - - - (Speak a
NOTE
Speak a programmed "device tag" within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar "device tag".
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
Edit, Delete, List, or Set Pairing Code.
®
your Bluetooth device. Your pairing
code is 0000 (XXXX). Input this code
®
on your Bluetooth device when
prompted on the device. See device
manual for instructions.
®
the Bluetooth device (Peripheral
device).
searched by the device.
device.
device after the beep.
device tag , an arbitrary name for
the device.)
Example: Stan's device.