Mazda 6 Owner's Manual page 231

Mazda6_8CJ2-EA-12C_Edition1 Page231
Monday, January 30 2012 10:9 AM
Fan control dial
Slow
This dial allows variable fan speeds.
0 Fan off
1 Low speed
2 Medium low speed
3 Medium high speed
4 High speed
Mode selector dial
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
The mode selector dial can be set at the
l
intermediate positions (
mode. Set the dial to an intermediate
position if you want to slightly adjust the
airflow amount.
For example, when the mode selector dial is
l
at the position between the
positions, airflow from the floor vent is less
than that of the
Form No.8CJ2-EA-12C
Fast
) between each
and
position.
Climate Control System
A/C switch
Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Press the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function when the
outside temperature approaches 0 °C (32 °F).
Air intake selector
This switch controls the source of air
entering the vehicle.
Press the switch to alternate
between the outside air and recirculated
air modes.
It is recommended that under normal
conditions the switch be kept in the
outside air mode.
Interior Comfort
6-7