Mazda 6 Owner's Manual page 369

Mazda6_8CJ2-EA-12C_Edition1 Page369
Monday, January 30 2012 10:10 AM
qClock
NOTE
(With CLOCK button)
When the trip computer is being displayed,
press the CLOCK button to change the display
to the time.
When the ignition is switched to ACC or
ON, the time is displayed.
Without navigation system
Time setting
1. Switch the ignition to ACC or ON.
2. Adjust the time using the time setting
buttons ( , ).
The hours advance while the time
setting button ( ) is pressed.
The minutes advance while the time
setting button ( ) is pressed.
Time resetting (With :00 button)
1. Switch the ignition to ACC or ON.
2. Press and hold the :00 button for 1.5
seconds or more. The displayed time
flashes.
3. When the button is released, the time
will be reset as follows:
(Example)
12:01 12:29→12:00
Form No.8CJ2-EA-12C
Interior Equipment
12:30 12:59→1:00
NOTE
When the button is released, the seconds will
start at "00".
With navigation system
Refer to the separate manual
NAVIGATION SYSTEM .
NOTE
Minutes and seconds are adjusted by the GPS,
however, it is necessary to adjust hours under
the following conditions:
Driving across different time zones
l
Daylight saving time start and end
l
qClimate Control Display (Fully
Automatic Type)
The climate control system status is
displayed. To operate the climate control
system, refer to Climate Control System
(page 6-2).
qAudio Display
The audio system status is displayed. To
operate the audio system, refer to
Audio System (page 6-16).
í
qTrip Computer
The trip computer can display the
following:
The current fuel economy.
l
The average fuel economy.
l
The approximate distance you can
l
travel on the available fuel.
The average vehicle speed.
l
Switch the ignition ON.
Press the INFO switch to change the
display mode.
í
Some models.
Interior Comfort
6-145