Mazda 6 Owner's Manual page 349

Mazda6_8CJ2-EA-12C_Edition1 Page349
Monday, January 30 2012 10:10 AM
NOTE
A device can be programmed only when the
l
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving -
pair up your device before you start
driving. Park the car in a safe place before
programming.
A total of seven devices can be programmed
l
to one vehicle. If you require an additional
device to be programmed to a vehicle with
seven devices already programmed, delete
one of the programmed devices before
programming the latest one.
®
If a Bluetooth device has already been
l
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
®
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
l
®
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
Device registration can also be done by
l
operating the audio unit.
Refer to Bluetooth® Audio Preparation on
page 6-89.
Device registration can also be done using
l
voice recognition (page 6-100).
Depending on the device, the registration
l
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
Form No.8CJ2-EA-12C
Bluetooth® Hands-Free (Panel Operation)
Programming a Bluetooth
device which has a PIN code (four
digits)
1. Press selection button 6 to display the
Bluetooth
screen.
2. Press selection button 2 to display the
pairing program screen.
3. Enter Pin:0000 and
code. Select OK when complete. are
displayed for input of the PIN code.
4. Turn the manual tuning dial to select
®
the specified number for the
Bluetooth
press the enter button (
the number.
NOTE
Some devices accept only a particular
l
pairing code (Usually, "0000" or "1234").
If pairing cannot be completed, refer to the
l
owner's manual of your mobile device, and
try those numbers if necessary.
5. After inputting the four digits, turn the
manual tuning dial and select OK ,
and then press the enter button
(
display Pairing is in progress. Please
start pairing procedure on your
Bluetooth
NOTE
Press the return button (
to the pairing program screen.
®
Hands-Free setting menu
Rotate/Press TUNE dial to change
®
Hands-Free device and
) to set the four digits and
®
device. Use the PIN
xxxx . .
Interior Comfort
®
Hands-Free
) to input
) to return
6-125