Mazda 6 Owner's Manual page 336

Mazda6_8CJ2-EA-12C_Edition1 Page336
Monday, January 30 2012 10:10 AM
Interior Comfort
Bluetooth® Hands-Free (Voice Recognition)
Press the talk button with a short press
during the read-out at the desired name,
and then say one of the following voice
commands to execute it.
Continue : Continues the list read-
l
out.
Call : Calls the registered phonebook
l
data when the talk button is short-
pressed.
Edit : Edits the registered phonebook
l
data when the talk button is short-
pressed.
Delete : Deletes the registered
l
phonebook data when the talk button is
short-pressed.
Previous : Returns to the previous
l
phonebook data in read-out when the
talk button is short-pressed.
6. Prompt: End of list, would you like
to start from the beginning?
7. Say: [Beep] No
qDTMF (Dual Tone Multi-
Frequency Signal) Transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the talk button with a short press.
2. Say: [Beep] XXXX... send (Say
DTMF code)
3. Prompt: Sending XXXX... (DTMF
code)
6-112
Form No.8CJ2-EA-12C
Hands-Free Setting
qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth
Free.
Refer to Bluetooth® Hands-Free
Preparation on page 6-100.
Registered device read-out
®
Bluetooth Hands-Free can read-out the
devices registered to its system.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Pairing options
5. Prompt: Available options are: Pair,
Edit, Delete, List, or Set Pairing Code.
6. Say: [Beep] List
®
®
Hands-