Table of Contents
Advertisement
ReMOTe aCCess
sections
table of contents
Manual settings
If the mouse settings on the target server were ever changed, or when
the operating system on the target server is Windows XP, 2003 Server,
Vista, or 2008 Server, or Linux, Novell, SCO UNIX
must configure the mouse manually.
To manually configure the mouse:
1 .
From the toolbar, click "
Settings" dialog box appears (see Figure 32).
Figure 32 Mouse Settings Dialog box
OmniViewIP 5216K/5232K
1
, or Sun Solaris, you
®
/ Manual Settings". The "Mouse
2
3
2 .
Select the target server's operating system and click "OK".
Instructions and sliders appear. Note: You must do this
configuration on every port.
3 .
Follow the instructions and set any relevant sliders to the same
values as set in the target server's "Mouse Properties" window.
4 .
Check USB if the SIM you are using is USB type.
Click "OK". The mouse pointers should be synchronized. There will be
no need to perform this setup unless you change the server attached to
the particular port.
36
4
5
6
Hide quick links:
Advertisement
Table of Contents
