Table of Contents
Advertisement
Web InTeRfaCe
sections
table of contents
adding a user
To add a user:
1.
Click
and type a name and a password. The password
must be at least six characters (letters or numbers), and must not
include the user name, even if other characters are added.
note! The following "special" characters: &, <, >, ", {, and } cannot
be used for either the user name or password.
Depending on the security level chosen, the user name and
password parameters are different. See the "Security > Settings"
section on page 23.
2.
Select the permission type from the "Permission" box.
3.
Click
and the user will appear in the list of users. The
Permission column shows the user level (Administrator, User, and
View Only). The Status column shows whether the user is blocked
or unblocked (explained in the "Blocking a user" section).
OmniViewIP 5216K/5232K
1
2
3
4
editing a user
To edit a user:
1.
Select the user from the user drop-down menu.
2.
You can now change all the parameters—user name, permission,
password, and blocking status (see the "Blocking a user" section).
3.
Click
. The changes are saved.
deleting a user
To delete a user:
1.
Select the user from the list.
2.
Click
.
3.
Click
to save any changes.
blocking a user
An alternative to deleting a user entry completely is blocking a user.
This means that the user's name and password is stored, but the user is
unable to access the system. Check "Block" to block a user, and then
click
to save any changes. Uncheck "Block" and click
allow the user access.
20
6
5
to
Hide quick links:
Advertisement
Table of Contents
