Thank you for purchasing the Belkin OmniView SOHO Series KVM Switch with Audio. We appreciate your business and have confidence that you will soon see for yourself why over 1 million Belkin OmniView KVM Switches are being used worldwide. Contents of Package: •...
9/18/02 5:17 PM OVERVIEW The Belkin OmniView SOHO Series KVM Switch with Audio allows you to control up to four computers, depending on the model, with one keyboard, monitor, and mouse. All SOHO Series KVM Switches with Audio support PS/2 input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and XGAII video.
VGA cable is required to preserve signal integrity. Cables must have HDDB15 female to HDDB15 male connectors. Belkin OmniView KVM Cables for SOHO Series with Audio offer the highest quality possible to ensure that your data is optimally transmitted. They are molded together for clean and organized setup, and include PC99 color-coded connectors for easier identification and connection.
PS/2 Mouse/Keyboard Ports Console PS/2 Mouse/Keyboard Ports Base Console VGA Port Back View SOHO Series 2-Port KVM Switch with Audio, PS/2 and USB shown OVERVIEW 2nd Computer USB Port–USB 2 2nd Computer Audio/Microphone Jacks 1st Computer USB Port–USB 1 1st Computer...
KVM Switch. Note: If your computer needs to be more than 25 feet (7.6m) from the KVM Switch, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using standard CAT5 UTP cable.
Plugging and unplugging cables while computers are powered on may cause irreversible damage to the computers and KVM Switch. Belkin Corporation will not be responsible for damage caused by these actions.
Page 8
INSTALLATION Connect the Computer 4. Using the VGA cable (Belkin part number F1D9100-XX), connect the male end of the cable to the VGA port of the computer, and the female end to the VGA port of the KVM Switch labeled “VGA1”.
Page 9
9/18/02 5:17 PM INSTALLATION Audio and Microphone Connections Recommended Belkin OmniView KVM Cables for SOHO Series with Audio are included with Belkin part number F1D9100-XX Note: Speakers and microphones are not required for use of your KVM Switch. Connect the Audio 1.
USB support is enabled. Connect the Console 1. Using the cable that is included with your monitor, connect it to the VGA port in the “Console” section of the KVM Switch. See Fig. 10. Fig. 10 Page 16 2.
Page 11
INSTALLATION Connect the Computer 5. Using a standard USB A to B cable (we recommend Belkin part number F1D9101-XX), insert the end with the B-type connector to the KVM Switch. Insert the other end of the cable with the A-type connector to an available port on your USB computer or USB hub that is attached to your computer.
The LED will be lit to indicate that the port is currently selected. Selecting a Computer Using Keyboard Hot Key Commands You can command the KVM Switch to switch ports with a simple keyboard command sequence by using the “SCROLL LOCK” key and up/down arrow keys.
Other standard features found on this unit include: hot key functionality; PS/2 keyboard and mouse emulations for error-free boot up; and a Belkin Two-Year Warranty. F1DB102P E Series 2-Port KVM Switch, PS/2...
The PRO2 Series uses standard cables for easy installation; includes a 12- volt DC, 1-Amp power supply; and is backed by a Belkin Five-Year Warranty. F1DA104T PRO2 Series 4-Port KVM Switch with On-Screen Display, PS/2 &...
Page 15
BELKIN KVM SWITCHES AND ACCESSORIES OmniView PRO Series Plus All-In-One KVM Cables Belkin PRO Series Plus Cables allow you to easily connect all your computers and servers to your OmniView KVM Switches, and are molded together for better cable management.
A: When using PS/2 connections, the KVM Switch can be up to 25 feet (7.6m) away from your computer. If your computer needs to be more than 25 feet (7.6m) from the KVM Switch, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using standard CAT5 UTP cable.
Page 17
Q: Can PS/2 and USB connections be used simultaneously on the same port? A: No, you must use one or the other per CPU port on the KVM Switch. Q: What are the benefits of the SOHO Series KVM Switch’s supporting...
KVM Switch for the appropriate port. • If you are using the KVM Switch for video switching only and have no keyboard and mouse connection between the KVM Switch and PC, you will need to purchase the optional 9V DC, 600mA power adapter (F1D065-PWR for your appropriate country).
Page 19
KVM Switch. • You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from the front of the KVM Switch for about 2–3 seconds, and then plugging it in again. Page 34...
Belkin Corporation warrants this product against defects in materials and workmanship for its warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.