Saving Changes To The Settings - Belkin OmniView 5216K User Manual

lOCal aCCess
sections
table of contents
ddC – f10
Display Data Channel (DDC) is a VESA standard for communication
between a monitor and a video adapter.
From the Settings window, input the DDC information of the monitor
connected to the Switch into the memories of all connected SIMs when
first installing the system.
To input the DDC information:
Press "F10". "Please wait" flashes a few times and disappears. The
monitor's DDC information is sent to all SIMs.
Updating the ddC information
Update the DDC information in any of the following circumstances:
•
When replacing the monitor connected to the Switch
• When adding a new SIM to the system
• When reconnecting an existing SIM that was temporarily used in a
different system
To update the DDC information, repeat the steps as set out above.
OmniViewIP 5216K/5232K
1 2 3 4

saving changes to the settings

To save changes to the settings and return to the Main window,
press "Esc".
47
6
5