Parameters; Manual Parameter Adjust - Simrad AP25 Manual

Simrad AP25 Autopilot
4.8

Parameters

• HI value parameters for automatic steering at low speed and
• LO value parameters for automatic steering at high speed and

Manual parameter adjust

Use course
Displayed
knob to adjust
parameter
parameters
LOw
Rudder LO
Cont.Rudder LO
Autotrim LO
Rudder Lim LO
HIgh
Rudder HI
Use PORT
Cont.Rudder HI
and STBD
buttons to step
Autotrim HI
through
parameters Rudder Lim HI
The values in the table are factory set (default) and listed for
Note !
information only. After having performed the Automatic tuning,
the values may differ from those listed in the table. See also
"Automatic Tuning" previously in this chapter.
With Virtual Rudder Feedback use 20 seconds time constant for
Note !
Autotrim.
126
when running with a sailboat.
when sailing into the wind or reaching with a sailboat.
Displacem.
40 sec.
40 sec.
A boats steering parameters found by
the Automatic tuning can be looked at
and if needed changed under this menu
item. The steering parameters can also
be set manually instead of performing
an Automatic tuning. The parameters
are divided into two sets (page 23):
Boat type
Planing &
& Sail Outboard
0.35 0.20
1.00 1.00
40 sec.
20° 20°
0.50 0.30
1.40 1.40
40 sec.
20° 20°
Own boat
Automatic
Manual
tuning
20221495F