Treadmill Belt Adjustments - Nautilus T9.14 Owner's Manual

PREVENTATIVE MAINTENANCE
Cleaning
1. DO NOT USE GLASS CLEANERS OR ANY OTHER
HOUSEHOLD CLEANERS ON THE CONSOLE.
Clean the console daily with a water-dampened
cloth and wipe dry after cleaning.
2. Clean the exterior of the machine daily using
soap and water or a diluted, non-mineral based
household cleaner such as Fantastic®.
3. Elevate the treadmill to maximum incline and
vacuum the floor under weekly it to prevent excess
dust and dirt from interfering with operation.
4. Depending upon the treadmill environment,
dust and or lint can accumulate under the hood.
Periodic internal cleaning should be done by a
qualified service personnel.
Inspection
1. Frame: Inspect the frame for any rust, bubbling, or
paint chips during the weekly cleaning. The salt in
perspiration can damage the unpainted surfaces.
Repair the damaged area with a touch-up paint kit
purchased from Nautilus (call Customer Service
for order information).
2. Inspect the power cord and walking belt for wear.
3. Check the position of the walking belt; be sure it is
not rubbing against the frame. The belt should be
evenly spaced on the deck within 0.25 inch; adjust
if necessary.
4. Remove potential hazards from the treadmill area.
qqqqq
WARNING
THE BELT ONLY. DO NOT ADD ANY LUBRICANTS.
ADDING LUBRICANTS CAN RUIN THE PROPRIETARY
FRICTION-CONTROL SURFACE.
DO NOT USE DETERGENTS OR CLEANING AGENTS
ON ANY PART OF THE DECK.
DO NOT LET LIQUID ENTER THE TREADMILL
OR DISPLAY.
qqqqq
WARNING
TREADMILL HOOD: DANGEROUS VOLTAGES ARE
PRESENT. COMPONENTS ARE SERVICEABLE ONLY
BY QUALIFIED SERVICE PERSONNEL.

Treadmill Belt Adjustments

qqqqq
WARNING
LOOSE CLOTHING BEFORE WORKING NEAR THE
TREADMILL WALKING SURFACE OR PULLEYS.
As the treadmills walking belt stretches through
use it will become necessary to tension on the belt.
This often occurs within the first few months of use.
Adjust the belt tension whenever the belt slips or
moves unsteadily during operation. The belt tension
is adjusted by moving the rear roller of the treadmill
back to reduce slack. This is accomplished by turning
the adjustment bolts located on the back of
the treadmill.
DRY MOP THE DECK UNDER
DO NOT REMOVE THE
SECURE LONG HAIR AND
49