Table of Contents
Advertisement
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Housing cover for high beam flasher
bulb, parking and standing lamp
338
2 Electrical connector for high beam
flasher housing bulb
3 Parking and standing lamp
4 Bulb socket for turn signal lamp
5 Bi-Xenon (low and high beam) housing
cover
Bi-Xenon headlamp
Warning!
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in Xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
ommend that you have such work done by a
qualified technician.
High beam flasher bulb
Switch off the lights.
Open the hood ( page 260).
Press ends of housing cover 1 tab to-
gether and remove cover.
Press connector 2 downward.
Remove connector 2 with the bulb.
G
Advertisement
Table of Contents
