Replacing Bulbs For Front Lamps - Mercedes-Benz SL 500 Operator's Manual

Mercedes-benz automobile operator's manual
Hide thumbs Also See for SL 500:
Table of Contents

Advertisement

Practical hints
Replacing bulbs

Replacing bulbs for front lamps

1 Bulb socket for turn signal lamp
2 Low beam lamp cover (Xenon or
Bi-Xenon* lamp). Do not remove.
3 High beam lamp cover
Warning!
Do not remove the cover for the Xenon or
Bi-Xenon* headlamp. Because of high volt-
age in Xenon and Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.
334
Replacing front turn signal bulb
Switch off the lights.
Open the hood ( page 253).
Twist bulb socket 1 counterclockwise
and pull out.
Push bulb into socket, turn counter-
clockwise and remove.
Insert new bulb in socket, push and
twist clockwise.
Reinsert bulb socket in lamp and twist
clockwise.
G
Replacing high beam bulbs
1 High beam bulbs
2 Locking mechanism
3 Parking and standing lamps
Switch off the lights.
Open the hood ( page 253).
Press ends of headlamp cover tab to-
gether and remove cover.
Pull electrical connector off.
Turn locking mechanism 2 counter-
clockwise and take out the bulb.
Insert the new bulb so that the base lo-
cates in the recess on the holder.

Advertisement

Table of Contents
loading

Table of Contents