Kyocera 6500i Operation Manual page 360

Hide thumbs Also See for 6500i:
Table of Contents

Advertisement

Send Log History
You can also send the log history to the specified destinations manually.
Use the procedure below to send the log history manually.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and then [Start] of Send Log History.
When the confirmation screen appears, press [Yes]. The log history is sent.
Job Log Subject
Set the subject automatically entered when sending log histories by e-mail.
Use the procedure below to set the subject.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and then [Change] of Job Log Subject.
3
Enter an e-mail subject not more than 60 characters.
NOTE:
Refer to the Character Entry Method on Appendix-8 for details on entering characters.
4
Check that the entry is correct and press [OK].
9-64
Default Setting (System Menu)

Advertisement

Table of Contents
loading

This manual is also suitable for:

8000i

Table of Contents