Kyocera 6500i Operation Manual page 319

NOTE:
Refer to page 4-38 for Auto Image Rotation.
Use the procedure below to set the default Auto Image Rotation settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [On].
4
Press [OK].
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
Item
Off
On
NOTE:
Refer to page 4-14 for EcoPrint.
Use the procedure below to set the default EcoPrint setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Off] or [On] for the default.
4
Press [OK].
Toner SaveLevel(EcoPrint)
Select the default Toner SaveLevel(EcoPrint). One of five levels [1] - [5] can be set.
NOTE:
Raising the level reduces toner consumption, but image quality falls.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to select the default Toner SaveLevel(EcoPrint).
1
Press the System Menu key.
2
Press [Common Settings], [
SaveLevel(EcoPrint).
3
Select from [1] to [5] for the default Toner SaveLevel(EcoPrint).
4
Press [OK].
], [Next] of Function Defaults, [
No EcoPrint performed.
EcoPrint performed.
], [Next] of Function Defaults, [
], [Next] of Function Defaults, [
9-23
Default Setting (System Menu)
] and then [Change] of Auto Image Rotation.
Description
] twice, and then [Change] of EcoPrint.
] twice, and then [Change] of Toner
9