Kyocera 6500i Operation Manual page 351

Use the procedure below to select the alternative emulation.
1
Press the System Menu Key.
2
Press [Printer] > [Change] of Emulation > [KPDL(Auto)] > [Alt Emulation].
3
Select the desired alternative emulation and then press [OK].
4
Press [OK].
Setting of KPDL error report
When an error has occurred during printing in KPDL emulation mode, set whether or not the error report is
output. The default setting is Off (not output).
Use the procedure below to specify the KPDL error report setting.
1
Press the System Menu Key.
2
Press [Printer] > [Change] of Emulation > [KPDL] or [KPDL(Auto)] > [KPDL Error Report].
3
Press [On] or [Off] and then press [OK].
4
Press [OK].
9-55
Default Setting (System Menu)
9