Kyocera 6500i Operation Manual page 321

Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
Item
Collate Off
On
Offset Off
Each Set
(Each Page)
NOTE:
Refer to page 3-14 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the defaults for Collate and Offset respectively.
4
Press [OK].
JPEG/TIFF Print
Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings.
Item
Fit to Paper Size
Image Resolution
Fit to Print Resolution
Use the procedure below to set the default JPEG/TIFF Print settings.
1
Press the System Menu key.
2
Press [Common Settings], [
Print.
3
Select the default for [Fit to Paper Size], [Image Resolution], or [Fit to Print Resolution].
4
Press [OK].
Collate not performed.
Collate performed.
Offset not performed.
Offset performed. (If [Off] is selected of Collate, it is
performed [Each Page].)
], [Next] of Function Defaults. Press [
Fit the image size to the selected paper size.
Print at resolution of the actual image.
Fit the image size to the print resolution.
], [Next] of Function Defaults. Press [
9-25
Default Setting (System Menu)
Description
] twice and [Change] of Collate/Offset.
Description
] twice and [Change] of JPEG/TIFF
9