Automatic Fabric Sensor System (Automatic Presser Foot Pressure) - Baby Lock espire BLSR Instruction And Reference Manual

USEFUL FUNCTIONS
a
Select a stitch.
b
Press
→ The key appears as
c
Place the fabric under the presser foot with
the needle at the starting point of the
stitching, and then press the "Start/Stop"
button. The machine will begin sewing.
a
Memo
If you press the "Start/Stop" button to pause sewing,
then press it again to continue, reverse stitches (or
reinforcement stitches) will not be sewn.
d
Press the "Start/Stop" button to stop the
machine at the point where the sewing
direction changes.
→ The machine stops with the needle in the fabric, and
the presser foot is raised.
48
to select the pivot setting.
.
e
Rotate the fabric, and then press the "Start/
Stop" button.
→ The presser foot is automatically lowered, and
sewing continues.
Automatic Fabric Sensor System
(Automatic Presser Foot Pressure)
The thickness of the fabric is automatically detected
and the presser foot pressure is automatically adjusted
with an internal sensor while sewing, so the fabric can
be fed smoothly. The fabric sensor works continuously
while sewing. This function is useful for sewing over
thick seams (see page 43), or quilting (see page 59).
a
Press .
→ The machine settings screen appears.