Using The Sewing Type Selection Key - Baby Lock espire BLSR Instruction And Reference Manual

SELECTING A UTILITY STITCH
Memo
• The next time that the same straight stitch is
selected, the stitch length is set to 2.0 mm.
• All stitch settings (stitch width, stitch length, thread
tension, automatic thread cutting, automatic
reverse/reinforcement stitching, mirror image, and
twin needle settings) are saved, not just the setting
that was changed. When the same stitch is selected,
the last settings saved are displayed even if the
machine was turned off. If the settings are changed
again and
to reset the setting to its default, the new settings
are not saved unless
54
is pressed, or if is pressed
is pressed another time.

Using the Sewing Type Selection Key

By pressing , a stitch can also be selected
according to its desired use. When you are not sure
which stitch to select for your application or when you
need information on how certain stitches are used,
press , select the appropriate stitch for your
project, and then follow the instructions to sew the
selected stitch.
We recommend that beginners use this method to
select stitches.
Memo
P. 1 appears if
selection screen is displayed, and P. 2 appears if
is pressed while any utility stitch selection
screen is displayed.
is pressed while a quilting stitch