Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric shock: The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning.
Page 4: For Users In The Uk, Eire, Malta
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this machine is fitted with a three-pin non-rewireable BS plug then please read the following. IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three-pin plug fitted.
Page 5: Federal Communications Commission (Fcc) Declaration Of Conformity (For Usa Only)
1760 Gilsinn Lane, Fenton, Missouri 63026 declares that the product Product Name: Baby Lock Sewing Machine Model Number: BLG2-NZ/BLG2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 6: Congratulations On Choosing Our Machine
In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Baby Lock retailer. For additional product information and updates, visit our web site at www.babylock.com...
Page 8: What You Can Do With This Machine
WHAT YOU CAN DO WITH THIS MACHINE SPECIAL FEATURES Check operations and view advice on the large LCD (liquid crystal display). Prepare the bobbin thread with one touch. The automatic thread tension makes trial sewing unnecessary. Automatic threading makes threading quick and easy. Getting Ready Sewing Basics To learn the operation of the principal...
Page 9: How To Use This Manual
HOW TO USE THIS MANUAL Chapter 1 and Chapter 2 explain your sewing machine’s basic operation procedures for someone who is using the sewing machine for the first time. If you want to sew utility stitches or character/ decorative stitches, read Chapter 1 and Chapter 2, then go on to Chapter 3 (Utility Stitches) or Chapter 4 (Character/ Decorative Stitches).
Page 10: Table Of Contents
Contents CONTENTS IMPORTANT SAFETY INSTRUCTIONS ....i Using the Sewing Type Selection Key ........61 SEWING THE STITCHES ........63 FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY .............. ii Straight Stitches ..............63 Federal Communications Commission (FCC) Declaration of Dart Seam ................67 Conformity (For USA Only) ............
Page 11: Adjustments During The Embroidery
Using a Frame Pattern to Make an Appliqué (1)....194 Using a Frame Pattern to Make an Appliqué (2)....195 Chapter 6 Embroidery Edit EXPLANATION OF FUNCTIONS ......198 SELECTING PATTERNS TO EDIT .......199 Selecting Embroidery Patterns/Floral Alphabet Patterns/ Frame Patterns/Baby Lock Exclusive Embroidery Designs ..200 Selecting Alphabet Character Patterns .........200...
Page 12 Contents...
Page 13: Names Of Machine Parts And Their Functions
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS The names of the various parts of the sewing machine and their functions are described below. Before using the sewing machine, carefully read these descriptions to learn the names of the machine parts. Machine ■...
Page 14: Needle And Presser Foot Section
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle and Presser Foot Section Measurements on the needle plate, bobbin cover and needle plate cover The measurements on the bobbin cover are references for patterns with a middle (center) needle position. The measurements on the needle plate and the needle plate cover are references for stitches with a left needle position.
Page 15: Embroidery Unit
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Embroidery Unit Operation Buttons a Carriage The carriage moves the embroidery frame automatically when embroidering. b Release button (located under the embroidery unit) Press the release button to remove the embroidery unit. c Feed dog position switch a “Start/Stop”...
Page 16: Included Accessories
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Included Accessories 35-38 are contained in the Included Accessories embroidery unit carrying case. To open the embroidery unit carrying case, raise the lock and move the latch out of position. To re-hook the Pull the top of the flat bed attachment to open the latches and securely close the case, position the accessory compartment.
Page 17 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 75/11 2 needles 90/14 2 needles 90/14 2 needles: Ball point needle (gold colored) * See Additional Accessories Guide for presser foot instruction. **Included Accessories 35-38 are contained in the embroidery unit carrying case.
Page 18 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Part Name Part Code Part Name Part Code 51 Additional accessories guide BLG2-NZ: XE2639-001 Buttonhole foot “A” X57789-151 BLG2: XE2554-001 Embroidery foot “W” XC8156-451 52 Embroidery unit carrying XC8150-051 Overcasting foot “G” XC3098-051 case Monogramming foot “N”...
Page 19: Options
• Use Baby Lock embroidery cards with your machine. Please see your retailer for availability of additional embroidery cards. • Visit your Baby Lock retailer for a complete listing of optional accessories available for your machine, or visit the Baby Lock web...
Page 20: Attaching The Lcd Cover
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Attaching the LCD cover Insert the tabs at the bottom of the LCD cover into the grooves at the bottom of the LCD. a Tabs b Grooves While pressing the latch at the top of the LCD cover, insert the tabs at the top of the LCD cover into the grooves at the top of the LCD.
Page 21: Chapter 1 Getting Ready
Chapter Getting Ready TURNING THE MACHINE ON/OFF............10 LCD SCREEN..................11 ■ Key Functions ........................12 Screens Operations Performed Using a USB Mouse..........14 ■ Clicking a key ........................14 ■ Changing pages .......................15 Using the Machine Setting Mode Key..............16 ■ Adjusting Screen Brightness ....................19 ■...
Page 22: Turning The Machine On/Off
TURNING THE MACHINE ON/OFF TURNING THE MACHINE ON/OFF WARNING • Use only regular household electricity as the power source. Using other power sources may result in fire, electric shock, or damage to the machine. • Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power cord receptacle on the machine.
Page 23: Lcd Screen
LCD SCREEN LCD SCREEN When switching on the machine, the screen will display the name of the machine. Touch the screen to display the utility stitch. Either “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is selected, depending on the setting selected in the setting screen (see page 16). Press a key with your finger to select the stitch pattern, to select a machine function, or to select an operation indicated on the key.
Page 24: Key Functions
LCD SCREEN ■ Key Functions Display Key Name Explanation Page Utility stitch key Press this key to select a straight stitch, zigzag stitch, buttonhole, blind hem stitch, or other stitches commonly used in garment construction. Character/Decorative Press this key to select character or decorative stitch patterns. stitch key Embroidery key Attach the embroidery unit and press this key to sew embroidery.
Page 25 LCD SCREEN Display Key Name Explanation Page Automatic Press this key to use the automatic reinforcement stitching (reverse stitching) reinforcement stitch setting. If you select this setting before sewing, the machine will automatically sew reinforcement stitches at the beginning and end of sewing (depending on the pattern, the machine may sew reverse stitches).
Page 26: Clicking A Key
LCD SCREEN ■ Clicking a key Screens Operations Performed When the mouse is connected, the pointer appears Using a USB Mouse in the screen. Move the mouse to position the pointer over the desired key, and then click the left mouse button.
Page 27: Changing
LCD SCREEN ■ Changing pages Rotate the mouse wheel to switch through the tabs of the pattern selection screens. Memo • If for additional pages is displayed, rotate the mouse wheel to display the next page. In the , click the left mouse button with the pointer on to move down to the next part of a page.
Page 28: Using The Machine Setting Mode Key
LCD SCREEN Using the Machine Setting Mode Key Press to change the default machine settings (needle stop position, embroidery speed, opening display, etc.) Press to display the different settings screens. Memo • Some of these functions will be available in future technology upgrades. •...
Page 29 The “NO.” is the number for the embroidery and sewing machine. j Display the program version. Memo • The latest version of software is installed in your machine. Check with your local authorized Baby Lock retailer or at www.babylock.com for available updates (see page 240).
Page 30 LCD SCREEN Embroidery settings a Select from among 10 embroidery frame displays (see page 178). b Change the thread color display on the embroidery screen; thread number, color name or each time to embroider (see page 177). c When the thread number #123 is selected, select among six thread brands (see page 177). d Adjust the maximum embroidery speed setting (see page 176).
Page 31: Adjusting Screen Brightness
LCD SCREEN ■ Adjusting Screen Brightness On the BRIGHTNESS OF LCD display, use Note to adjust the screen • All or part of the screen may sometimes become darker or lighter because of brightness. changes in the air temperature or other changes in the environment around the Press to make the screen darker.
Page 32: Choosing The Display Language
LCD SCREEN ■ Choosing the Display Language Press → The Sewing settings screen appears. Press → The General settings screen appears. to choose the display language. Choose from the following languages: [ENGLISH], [GERMAN], [FRENCH], [ITALIAN], [DUTCH], [SPANISH], [JAPANESE], [DANISH], [NORWEGIAN], [FINNISH], [SWEDISH], [PORTUGEUSE] or [RUSSIAN].
Page 33: Using The Machine Operation Mode Key
LCD SCREEN Using the Machine Operation Mode Key Press to open the screen shown below. Six categories are displayed at the top of the screen. Press a key to see more information about that category. displays information about displays information about displays information about the main parts of the machine and their the operation buttons.
Page 34: Using The Pattern Explanation Key
LCD SCREEN Example: Displaying information about Press to return to the original upper threading screen. Press Using the Pattern Explanation Press → The lower half of the screen will change. If you want to know more about the uses of a stitch pattern, select the pattern and press to see an explanation of the stitch selection.
Page 35: Lower Threading
LOWER THREADING LOWER THREADING Turn the main power to ON and open the Winding the Bobbin top cover. Align the groove in the bobbin with the spring on the bobbin winder shaft, and set → → → Press the bobbin on the shaft. in that order to display a video example of bobbin winding on the LCD (see page 22).
Page 36 LOWER THREADING Pass the thread under the pin, and pass the thread around the pretension disk making CAUTION sure that the thread is under the pretension disk. • If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin, the thread will wind uneven on the bobbin and eventually cause damage to the machine.
Page 37: Using The Spool Pin
LOWER THREADING ■ Using the Spool Pin Set the bobbin holder to the left, until it clicks into place. You can use the main spool pin to wind the bobbin before sewing. You cannot use this spool pin to wind the bobbin while sewing. a Bobbin holder (switch) Memo When the bobbin holder is set to the left, it...
Page 38: Setting The Bobbin
LOWER THREADING Push the spool cap onto the spool pin as far Setting the Bobbin as possible, then return the spool pin to its original position. Holding the thread with your hands, slide → → → Press the thread into the grooves on the thread guide plate.
Page 39 LOWER THREADING Slide the bobbin cover latch to the right. Pass the thread through the guide, and then pull the thread out towards the front. a Bobbin cover b Latch → The bobbin cover opens. a Cutter Remove the bobbin cover. →...
Page 40: Pulling Up The Bobbin Thread
LOWER THREADING Pull up the bobbin thread, then pass it Pulling Up the Bobbin Thread under the presser foot and pull it about 100 mm (approx. 3-4 inches) toward the back of the machine, making it even with There may be some sewing applications where you want to pull up the bobbin thread;...
Page 41: Upper Threading
UPPER THREADING UPPER THREADING Turn the main power to ON. Threading Using the “Automatic Press the “Needle Position” button to raise Threading” Button the needle. → → → Press in that order to display a video example of the operation on the LCD (see page 22). Follow the steps explained below to complete the operation.
Page 42 UPPER THREADING Press the “Automatic Threading” button to Memo have the machine automatically thread the When sewing with fine, cross-wound thread, needle. use the small spool cap, and leave a small space between the cap and the thread spool. a Spool cap (small) b Thread spool (cross-wound thread) c Space Holding the thread with your hands, slide...
Page 43: Threading Manually
UPPER THREADING Note When the “Automatic Threading” button is pressed, the presser foot will be automatically lowered. If you are using an incorrect needle and thread combination, the hook may sometimes get caught in the needle. If this happens, remove the hook from the needle as described below.
Page 44 UPPER THREADING Raise the presser foot lever. Holding the thread with both hands, slide the thread into the grooves on the thread guide plate. CAUTION a Thread guide plate • If the presser foot is not raised, the sewing machine cannot be threaded correctly. While holding the thread in your right hand, use your left hand to pull the thread Pivot the spool pin so that it angles upward.
Page 45 UPPER THREADING Pull the thread up along the left side of the Holding the thread with both hands, pass thread path guide to the top left corner of the thread through both the upper and the threading path cover. lower needle bar thread guides. a Top left corner a Needle bar thread guide (upper) b Threading path cover...
Page 46: Using The Twin Needle Mode
UPPER THREADING Manually thread the machine. Using the Twin Needle Mode Follow the steps for threading a single needle for the first threading (see “Threading Manually” on page The twin needle can only be used for patterns that 31). show after being selected.
Page 47 UPPER THREADING Place the additional spool of thread on the Pass the thread through the thread guide supplemental spool pin, so that the thread plate, following the sequence as described unwinds from the back. Then push the below (or refer to “Threading Manually” on spool cap onto the spool pin as far as page 31).
Page 48: Using Threads That Unwind Quickly
UPPER THREADING Select a stitch pattern. (Example: Using Threads that Unwind Quickly Refer to the “STITCH SETTING CHART” at the end of this manual for proper stitch to use with presser foot “J”. ■ Using the Spool Net → The Selected stitch is displayed. If using transparent nylon thread, metallic thread, or Note other strong thread, place the included spool net...
Page 49: Changing The Presser Foot
CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT CAUTION • Always press on the screen before changing the presser foot. If is not pressed and the “Start/Stop” button or another button is pressed, the machine will start and may cause injury. •...
Page 50: Attaching The Walking Foot
CHANGING THE PRESSER FOOT Lower the presser foot lever. Insert the Attaching the Walking Foot screw, and tighten the screw securely with the screwdriver. The walking foot holds the fabric between the presser foot and the feed dogs to feed the fabric. This enables you to have better fabric control when sewing difficult fabrics (such as quilting or velvet) or fabrics that slip easily (such as vinyl...
Page 51: Changing The Needle
CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION • Always press on the screen before changing the needle. If is not pressed and the Start/ Stop button or another operation button is pressed accidentally, the machine will start and injury may result.
Page 52 CHANGING THE NEEDLE With the flat side of the needle facing the back, insert the new needle all the way to the top of the needle stopper (viewing window) in the needle clamp. Use a screwdriver to securely tighten the needle clamp screw.
Page 53: About The Needle
CHANGING THE NEEDLE ■ About the Needle The sewing machine needle is probably the most important part of the sewing machine. Choosing the proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles.
Page 54 CHANGING THE NEEDLE...
Page 55: Chapter 2 Sewing Basics
Chapter Sewing Basics SEWING ....................44 Sewing a Stitch......................44 ■ Using the Foot Controller....................45 Sewing Reinforcement Stitches ................46 Sewing Curves ......................46 Changing Sewing Direction ..................46 ■ Sewing a Seam Allowance of 0.5 cm or Less ..............46 Sewing Heavyweight Fabrics...................47 ■ If the Fabric does not Fit under the Presser Foot .............47 ■...
Page 56: Sewing
SEWING SEWING CAUTION • To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. •...
Page 57: Using The Foot Controller
SEWING Press the “Start/Stop” button to start Note sewing. • When cutting thread thicker than #30, nylon Guide the fabric lightly by hand. thread, or other decorative threads, use the thread cutter on the side of the machine. When the needle has stopped moving, raise the presser foot and remove the fabric.
Page 58: Sewing Reinforcement Stitches
SEWING Slowly depress the foot controller to start Sewing Curves sewing. Sew slowly while keeping the seam parallel with the fabric edge as you guide the fabric around the curve. Memo The speed set using the sewing speed controller is the foot controller’s maximum sewing speed.
Page 59: Sewing Heavyweight Fabrics
SEWING ■ If the Fabric does not Feed Sewing Heavyweight Fabrics If the fabric does not feed when starting to sew or when sewing thick seams, press the black button on The sewing machine can sew fabrics up to 6 mm the left side of presser foot “J”.
Page 60: Sewing Lightweight Fabrics
SEWING Sewing Lightweight Fabrics Place thin paper or tear away embroidery stabilizer under thin fabrics to make sewing easier. Gently tear off the paper or the stabilizer after sewing. a Thin paper Sewing Stretch Fabrics First, baste together the pieces of fabric, and then sew without stretching the fabric.
Page 61: Stitch Settings
STITCH SETTINGS STITCH SETTINGS When you select a stitch, your machine automatically selects the appropriate stitch width, stitch length, and upper thread tension. However, if needed, you can change any of the individual settings. Note • Settings for some stitches cannot be changed (refer to the “STITCH SETTING CHART” at the end of this manual).
Page 62: Setting The Thread Tension
STITCH SETTINGS ■ Proper Thread Tension Example: The upper and lower threads should cross near the Press to shorten the stitch length. center of the fabric. If the thread tension is not properly set, the seam may have a poor finish or the fabric may pucker.
Page 63: Useful Functions
USEFUL FUNCTIONS USEFUL FUNCTIONS Set the fabric in the start position and start Automatic Reinforcement sewing. Stitching After selecting a stitch pattern, turn on the automatic reinforcement stitching function before sewing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the stitch pattern) at the beginning and end of sewing.
Page 64: Automatic Thread Cutting
USEFUL FUNCTIONS Set the fabric in the start position and start Automatic Thread Cutting sewing. After selecting a stitch pattern, turn on the automatic thread cutting function before sewing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the stitch pattern) at the beginning and end of sewing, and trim the threads at the end of sewing.
Page 65: Pivoting
USEFUL FUNCTIONS ■ Using the Knee Lifter Pivoting Using the knee lifter, you can raise and lower the presser foot with your knee, leaving both hands free If the pivot setting is selected, the machine stops to handle the fabric. with the needle lowered (in the fabric) and the Align the tabs on the knee lifter with the presser foot is automatically raised to an...
Page 66 USEFUL FUNCTIONS Place the fabric under the presser foot with Note the needle at the starting point of the • The “NEEDLE POSITION” (P. 2 of the stitching, and then press the “Start/Stop” settings screen) must be set in the down button.
Page 67: Automatic Fabric Sensor System (Automatic Presser Foot Pressure)
USEFUL FUNCTIONS Automatic Fabric Sensor System Locking the Screen (Automatic Presser Foot If the screen is locked before starting to sew, the Pressure) various settings such as the stitch width and stitch length are locked and cannot be changed. This prevents screen settings from accidentally being The thickness of the fabric is automatically changed or the machine from being stopped while...
Page 68 USEFUL FUNCTIONS...
Page 69: Chapter 3 Utility Stitches
Chapter Utility Stitches SELECTING UTILITY STITCHES ......58 One-step Buttonholes ............97 ■ Sewing Stretch Fabrics ............100 ■ Stitch Selection Screens............58 ■ Odd Shaped Buttons/Buttons that do not Fit into Selecting a Stitch .............. 59 the Button Holder Plate ............100 ■ Using the Mirror Image Key ............. 59 Four-step Buttonholes............101 ■...
Page 70: Selecting Utility Stitches
SELECTING UTILITY STITCHES SELECTING UTILITY STITCHES ■ Stitch Selection Screens There are 5 categories of Utility Stitches. indicates that there is more than one stitch selection screen for that category. Straight/Overcasting/Quilting Stitches Decorative Stitches Heirloom Stitches Buttonholes/Bar tacks Multi-directional Sewing...
Page 71: Selecting A Stitch
SELECTING UTILITY STITCHES ■ Using the Mirror Image Key Selecting a Stitch Depending on the type of utility stitch you select, you may be able to sew a horizontal mirror image of the stitch. Turn the main power to ON. is lit when you select a stitch, it will be →...
Page 72: Saving Your Stitch Settings
SELECTING UTILITY STITCHES Press to change the thread color of Saving Your Stitch Settings the stitch on the screen. The settings for the zigzag stitch width, stitch Press to display an enlarged image of the length, thread tension, automatic thread cutting, automatic reinforcement stitching, etc., are preset stitch.
Page 73: Using The Sewing Type Selection Key
SELECTING UTILITY STITCHES Press the numbered key of the settings to be Press retrieved. Press to return to the original screen without retrieving settings. → The settings are saved and the original screen automatically appears. Memo a Numbered keys If you try to save settings when there are already 5 sets of settings saved for a stitch, the Press message “The pockets are full.
Page 74 SELECTING UTILITY STITCHES Example: Displaying information about Read the explanations and select the overcasting appropriate stitch. Press to scroll the page. Press → The screen displays directions for sewing the → The advice screen is displayed. selected stitch. Follow the directions to sew the stitch. Press Press to view the next page.
Page 75: Sewing The Stitches
SEWING THE STITCHES SEWING THE STITCHES Straight Stitches Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto. Manual Straight stitch (Left) General sewing, gather, pintuck, etc. Reverse stitch is sewn while 0.0 - 7.0 0.2 - 5.0 pressing “Reverse/...
Page 76 SEWING THE STITCHES Select a stitch. CAUTION Be sure the needle does not strike a basting pin, or any other objects, during sewing. The thread could tangle or the needle could break, causing injury. When sewing is completed, hold the “Reverse/Reinforcement Stitch”...
Page 77: Changing The Needle Position (Left Or Middle Needle Position Stitches Only)
SEWING THE STITCHES ■ Changing the Needle Position (Left ■ Needle Plate and Needle Plate Cover or Middle Needle Position Stitches Marks Only) For a standard 16 mm (approx. 5/8 inch) seam allowance, set the width to 0.0 mm on the screen. When you select left or middle needle position While sewing, align the edge of the fabric with the stitches, you can use...
Page 78 SEWING THE STITCHES Press the “Presser Foot Lifter” button to Insert the bobbin case in its original raise the presser foot and turn the main position (see page 227), and then attach the power to OFF. needle plate cover. Remove the flat bed attachment or the After reinstalling the needle plate cover, embroidery unit if either are attached.
Page 79: Dart Seam
SEWING THE STITCHES ■ Basting Dart Seam Select and attach presser foot “J”. Select and attach presser foot “J”. Press the “Reverse/Reinforcement Stitch” button to sew reinforcement stitches, then Sew a reverse stitch at the beginning of the continue sewing. dart and then sew from the wide end to the other end without stretching the fabric.
Page 80: Gathering
SEWING THE STITCHES Iron the dart to one side so that it is flat. Sew two rows of straight stitches parallel to the seam line, then trim excess thread leaving 50 mm (approx. 1-15/16 inches). Gathering a Seam line b 10 to 15 mm (approx. 3/8 inch to 9/16 inch) Use on waists of skirts, sleeves of shirts, etc.
Page 81: Flat Fell Seam
SEWING THE STITCHES Fold the longer seam allowance around the Flat Fell Seam shorter one, and sew the edge of the fold. Use for reinforcing seams and finishing edges neatly. Select and attach presser foot “J”. With right sides of the fabric together, sew the seam line, then cut half of the seam allowance from the side on which the flat fell seam will lie.
Page 82 SEWING THE STITCHES Select and attach presser foot “I”. Sew a straight stitch along the fold. When the automatic thread cutting and automatic reinforcement stitching are preset, reinforcement stitches will be sewn automatically at the beginning of sewing. Press the “Reverse/Reinforcement Stitch” button to sew a reinforcement stitch and trim the thread automatically at the end of sewing.
Page 83: Zigzag Stitches
SEWING THE STITCHES Zigzag Stitches Zigzag stitches are useful for overcasting, appliqué, patchwork, and many other applications. Select a stitch, and attach presser foot “J”. If the stitch which you select has a double mark “ ” at the top of the key display, you can sew reverse stitches by holding the “Reverse/Reinforcement Stitch”...
Page 84: Patchwork (For Crazy Quilt)
SEWING THE STITCHES ■ Patchwork (for Crazy Quilt) Snap the cord guide bobbin cover into place, making sure that the gimp thread can Turn back the desired width of fabric and position it be fed freely. over the lower fabric, then sew so that the stitch bridges both pieces of fabric.
Page 85: Elastic Zigzag Stitches
SEWING THE STITCHES Elastic Zigzag Stitches Use elastic zigzag stitches for tape attaching, overcasting, darning, or a wide variety of other uses. Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto.
Page 86: Overcasting
SEWING THE STITCHES Overcasting Use for the beginning and end of seams in skirts or trousers, and the beginning and end of all cuttings. Use presser foot “G”, presser foot “J”, or the optional side cutter attachment depending on the kind of overcasting stitch you select.
Page 87: Overcasting Using Presser Foot "J
SEWING THE STITCHES ■ Overcasting Using Presser Foot “J” Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto. Manual Overcasting stitch Reinforced seaming of stretch 0.0 - 7.0 0.5 - 4.0 fabric (3/16) (0 - 9/32)
Page 88: Overcasting Using The Optional Side Cutter
SEWING THE STITCHES ■ Overcasting Using the Optional Side Cutter By using the side cutter, you can do overcasting while cutting the fabric. CAUTION • Make sure to only select one of the stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury.
Page 89 SEWING THE STITCHES Position the side cutter so that the side Thread the needle manually and pull out a cutter pin is aligned with the notch in the long section of the upper thread. Pass it presser foot holder, and then lower the below the presser foot and pull it out in the presser foot.
Page 90: When Sewing Straight Stitches While Using The Side Cutter
SEWING THE STITCHES ■ When Sewing Straight Stitches While Using the Side Cutter The seam margin should be approximately 5 mm (approx. 3/16 inch). a Seam margin Memo • The fabric will not be cut if the whole fabric is simply spread out underneath the presser foot guide plate.
Page 91: Quilting
SEWING THE STITCHES Quilting You can make beautiful quilts quickly and easily with this machine. When making a quilt, you will find it convenient to use the knee lifter and foot controller to free your hands for other tasks (see “Using the Foot Controller”...
Page 92: Piecing
SEWING THE STITCHES ■ Piecing ■ Quilting Sewing two pieces of fabric together is called Sewing together the quilt top, batting, and backing is piecing. When cutting pieces for quilt blocks, make called quilting. You can sew the quilt with the sure the seam allowance is 6.5 mm (approx.
Page 93: Appliqué
SEWING THE STITCHES ■ Appliqué Select and attach presser foot “J”. Trace the pattern onto the appliqué fabric and then cut around it, leaving a 3 to 5 mm Use the quilting appliqué stitch to attach (approx. 1/8 to 3/16 inch) seam allowance. the appliqué.
Page 94: Quilting With Satin Stitches
SEWING THE STITCHES ■ Quilting with Satin Stitches Set the width control to “ON”. Use the foot controller to sew with satin stitches. If you set the speed control slide to control the stitch width, you can make subtle changes in the stitch width during sewing.
Page 95: Free-Motion Quilting
SEWING THE STITCHES ■ Free-motion Quilting Memo With free-motion quilting, the feed dogs can be • When starting to sew, the internal sensor lowered (using the feed dog position switch) so that detects the thickness of the fabric, and the the fabric can be moved freely in any direction.
Page 96 SEWING THE STITCHES Remove the presser foot holder (see page Press to set the machine to free- 38). motion sewing mode. Attach free-motion quilting foot “C” at the front with the presser foot holder screw aligned with the notch in the quilting foot. a Presser foot holder screw b Notch Note...
Page 97 SEWING THE STITCHES Using Free-motion Open Toe Quilting Foot “O” Lower the feed dog position switch, located The free-motion open toe quilting foot “O” is used at the rear of the base of the machine, to for free-motion quilting with zigzag or decorative stitches or for free-motion quilting of straight lines on fabric with an uneven thickness.
Page 98: Echo Quilting Using The Free-Motion Echo Quilting Foot "E
SEWING THE STITCHES Hold the quilting foot in place with your Press to set the machine to free- right hand, and tighten the presser foot holder screw using the screwdriver with motion sewing mode. your left hand. a Presser foot holder screw CAUTION •...
Page 99 SEWING THE STITCHES Free-motion echo quilting foot “E” measurement Press to set the machine to free- motion sewing mode. a 6.4 mm (approx. 1/4 inch) b 9.5 mm (approx. 3/8 inch) CAUTION • With free-motion quilting, control the feeding speed of the fabric to match the sewing speed. If the fabric is moved faster than the sewing speed, the needle may break or other damage may result.
Page 100 SEWING THE STITCHES Tighten the screw with the included Finished project screwdriver. Press to cancel the free-motion sewing mode. CAUTION • Be sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break.
Page 101: Blind Hem Stitches
SEWING THE STITCHES Blind Hem Stitches Select from these stitches to sew the hems or cuffs of dresses, blouses, pants, or skirts. Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto.
Page 102: Appliqué
SEWING THE STITCHES Remove the basting stitches and turn the Appliqué fabric over. Use a temporary spray adhesive, fabric glue or a basting stitch to attach the appliqué to the fabric. This will keep the fabric from moving during sewing. a Wrong side of fabric b Right side of fabric Memo...
Page 103: Shelltuck Stitches
SEWING THE STITCHES ■ Sewing Sharp Curves To make rows of shell tuck stitches, fold the fabric in half along the bias. Stop the machine with the needle in the fabric outside the appliqué. Raise the presser foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam.
Page 104: Scallop Stitches
SEWING THE STITCHES Scallop Stitches Top Stitching This wave-shaped satin stitch is called the scallop For a decorative look called “Crazy Quilting”, the stitch. Use this stitch to decorate the edges of following stitches can be sewn on top of a pressed blouse collars and handkerchiefs or use it as a hem seam allowance.
Page 105: Smocking Stitches
SEWING THE STITCHES Sew the spaces between the straight seams. Smocking Stitches Use smocking stitches for decorative sewing on clothes, etc. Select a straight stitch and attach presser foot “J”. Set the stitch length to 4.0 mm (approx. 3/16 inch) and loosen the upper thread tension to approximately 2.0 (See pages 49 through 50).
Page 106: Tape Or Elastic Attaching
SEWING THE STITCHES Attach presser foot “J”. Align the center of Place the tape over the gather, and hold it the presser foot with the middle of the in place with basting pins. space between the fabrics and begin sewing. a Tape Select a Basting stitches...
Page 107: Heirloom
SEWING THE STITCHES Start sewing. Heirloom Example: Illustration of finished product ■ Hemstitching (1) (Daisy Stitch) Use for sewing tablecloths, decorative hems, and decorative stitching on shirt fronts. Memo Use a light to medium weight homespun fabric with a little stiffness. Insert a type 130/705H, size 100/16 Wing needle.
Page 108: Hemstitching (3) (Drawn Work (2))
SEWING THE STITCHES ■ Hemstitching (3) (Drawn Work (2)) Press to create a mirror image of the Pull out several threads from both sides of stitch. the 4 mm (approx. 3/16 inch) area which Sew the opposite side to keep the stitch are not yet open.
Page 109: One-Step Buttonholes
SEWING THE STITCHES One-step Buttonholes With one-step buttonholes, you can make buttonholes appropriate to the size of your button. Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto. Manual Narrow rounded Buttonhole on light to medium 3.0 - 5.0 0.2 - 1.0...
Page 110 SEWING THE STITCHES One-step buttonholes are sewn from the front of the presser foot to the back, as shown below. a Reinforcement stitching Select a buttonhole stitch, and attach Pull out the button holder plate on the buttonhole foot “A”. presser foot, and insert the button that will be put through the buttonhole.
Page 111 SEWING THE STITCHES Align the presser foot with the mark on the Gently hold the end of the upper thread, fabric, and lower the presser foot. and then start sewing. Feed the fabric carefully by hand while the buttonhole is sewn. a Mark on the fabric b Marks on the presser foot →...
Page 112: Sewing Stretch Fabrics
SEWING THE STITCHES Once sewing is completed, gently pull the Memo gimp thread to remove any slack, and trim For keyhole buttonholes, use the eyelet punch off any excess. to make a hole in the rounded end of the buttonhole. Then insert a pin along the inside of one of the bar tacks, insert a seam ripper into the hole made with the eyelet punch, and cut towards the pin.
Page 113: Four-Step Buttonholes
SEWING THE STITCHES Four-step Buttonholes You can sew 4-step buttonholes using the following 4 stitches together. You can sew any desired length for the buttonhole when using 4-step buttonholes. 4-step buttonholes are a good option when attaching oversize buttons. Note When changing the stitch settings for the left side of the buttonhole, make sure that all setting should be changed to match.
Page 114 SEWING THE STITCHES Press the “Start/Stop” button to start sewing. Sew the desired length for the buttonhole and press the “Start/Stop” button again. Select stitch to sew the bar tack and press the “Start/Stop” button. → The machine will automatically stop after sewing the bar tack.
Page 115: Darning
SEWING THE STITCHES ■ Darning Use darning stitches for mending and other applications. Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto. Manual Darning Darning of medium weight fabric 2.5 - 7.0 0.4 - 2.5 (1/4) (3/32 - 1/4)
Page 116 SEWING THE STITCHES Lower the buttonhole lever so that it is positioned behind the metal bracket on the buttonhole foot. a Buttonhole lever a Metal bracket Gently hold the end of the upper thread, and then press the “Start/Stop” button to start the machine.
Page 117: Bar Tacks
SEWING THE STITCHES Bar Tacks Use bar tacks to reinforce areas that will be subject to strain, such as pocket corners. Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto. Manual Bar tack Reinforcement at opening of...
Page 118: Bar Tacks On Thick Fabrics
SEWING THE STITCHES ■ Bar Tacks on Thick Fabrics Lower the buttonhole lever so that it is positioned behind the metal bracket on the Place a piece of folded fabric or cardboard beside buttonhole foot. the fabric being sewn to level the buttonhole foot and allow for easier feeding.
Page 119: Button Sewing
SEWING THE STITCHES Button Sewing Buttons can be sewn on using the machine. Buttons with 2 or 4 holes can be attached. Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto.
Page 120: Attaching 4 Hole Buttons
SEWING THE STITCHES ■ Attaching 4 Hole Buttons Tie the ends of the bobbin thread from the beginning and end of sewing together on Sew the two holes closest to you. Then raise the the wrong side of the fabric. presser foot and move the fabric so that the needle goes into the next two holes, and sew them in the Note...
Page 121: Eyelet
SEWING THE STITCHES Eyelet Use this stitch for making belt holes and other similar applications. Stitch width Stitch length Presser Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name Applications foot needle Auto. Manual Auto. Manual Eyelet For making eyelets, holes on 7.0 6.0 5.0 7.0 6.0 5.0 belts, etc.
Page 122: Multi-Directional Sewing (Straight Stitch And Zigzag Stitch)
SEWING THE STITCHES Set the needle in the fabric at the sewing Multi-directional Sewing start point, and sew seam “1” as shown. (Straight Stitch and Zigzag Stitch) Use these stitch patterns to attach patches or emblems to pant legs, shirt sleeves, etc. Remove the flat bed attachment to create the free arm function.
Page 123: Zipper Insertion
SEWING THE STITCHES Press the seam allowance open and attach Zipper Insertion the zipper with a basting stitch in the middle of each side of the zipper tape. ■ Centered Zipper Use for bags and other such applications. Select a Basting stitches b Zipper c Wrong side of fabric Remove presser foot “J”.
Page 124: Inserting A Side Zipper
SEWING THE STITCHES Press the seam allowance open and align the folded hem along the teeth of the CAUTION zipper, while maintaining 3 mm (approx. 1/8 inch) of sewing space. Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury.
Page 125 SEWING THE STITCHES Set the presser foot in the 3 mm (approx. Remove the presser foot, and reattach it so 1/8 inch) margin. that the left side of the pin is attached to the presser foot holder. Starting from the end of the zipper opening, When sewing the left side of the zipper, the needle sew to a point about 50 mm (approx.
Page 126 SEWING THE STITCHES...
Page 127: Chapter 4 Character/Decorative Stitches
Chapter Character/ Decorative Stitches SELECTING STITCH PATTERNS....................116 ■ Stitch Selection Screens............................117 Selecting Decorative Stitch Patterns/7mm Decorative Stitch Patterns/Satin Stitch Patterns/7mm Satin Stitch Patterns/ Cross Stitch/Utility Decorative Stitch Patterns ......................118 Alphabet Characters ..............................118 ■ Deleting Characters............................. 119 SEWING STITCH PATTERNS ....................120 Sewing Attractive Finishes .............................
Page 128: Selecting Stitch Patterns
SELECTING STITCH PATTERNS SELECTING STITCH PATTERNS Press to display the screen below. a Decorative stitch patterns b 7mm decorative stitch patterns. You can set stitch length and width. c Satin stitch patterns d 7mm satin stitch patterns. You can set stitch length and width. e Cross stitch f Utility decorative stitch patterns g Alphabet characters (gothic font)
Page 129: Stitch Selection Screens
SELECTING STITCH PATTERNS ■ Stitch Selection Screens There are 9 categories of Character/Decorative stitch patterns. indicates that there is more than one stitch selection screen for that category. Decorative Stitch Patterns 7mm Decorative Stitch Patterns Satin Stitch Patterns 7mm Satin Stitch Patterns Cross Stitch Utility Decorative Stitch Patterns Alphabet Characters...
Page 130: Selecting Decorative Stitch Patterns/7Mm Decorative Stitch Patterns/Satin Stitch Patterns/7Mm Satin Stitch Patterns/Cross Stitch/Utility Decorative Stitch Patterns
SELECTING STITCH PATTERNS Selecting Decorative Stitch Alphabet Characters Patterns/7mm Decorative Stitch Patterns/Satin Stitch Patterns/ Press to select a 7mm Satin Stitch Patterns/Cross font. Stitch/Utility Decorative Stitch Patterns Select the category of the pattern you want to sew. Press the key of the stitch pattern you want to sew.
Page 131: Deleting Characters
SELECTING STITCH PATTERNS ■ Deleting Characters Press to delete the last character. Memo Characters are deleted individually starting with the last character entered. Select the correct character.
Page 132: Sewing Stitch Patterns
SEWING STITCH PATTERNS SEWING STITCH PATTERNS Sewing Attractive Finishes To achieve attractive results when sewing character/decorative stitches, check the table below for the proper fabric/needle/thread combinations. Note • Other factors, such as fabric thickness, stabilizer material, etc., also have an effect on the stitch, so you should always sew a few trial stitches before beginning your project.
Page 133: Making Adjustments
SEWING STITCH PATTERNS Memo Making Adjustments If the fabric is pulled or pushed during sewing, the pattern may not turn out correctly. Also, Your stitch pattern may sometimes turn out poorly, depending on the pattern, there may be depending on the type or thickness of fabric, the movement to the left and right as well as front stabilizer material used, sewing speed, etc.
Page 134 SEWING STITCH PATTERNS Sew the stitch pattern again. Press , and then adjust the pattern If the stitch pattern still comes out poorly, make with the FINE ADJUST VERTI. or HORIZ. adjustments again. Adjust until the stitch pattern comes out correctly. displays.
Page 135: Editing Stitch Patterns
EDITING STITCH PATTERNS EDITING STITCH PATTERNS ■ Key Functions You can create just the finish you want using the editing functions. Make patterns larger or smaller, make mirror images, etc. Note • Some editing functions cannot be used with certain stitch patterns. Only the functions for the displayed keys are available when a pattern is selected.
Page 136: Changing The Size
EDITING STITCH PATTERNS Display Key Name Explanation Page Single/Repeat sewing Press this key to choose single stitches or continuous stitches. Elongation key When 7mm satin stitch patterns are selected, press this key to choose from 5 automatic length settings, without changing the stitch zigzag width or stitch length settings.
Page 137: Changing The Length (For 7Mm Satin Stitch Patterns Only)
EDITING STITCH PATTERNS Changing the Length (for 7mm Creating a Horizontal Mirror Satin Stitch Patterns Only) Image To create a horizontal mirror image, select a stitch When stitch patterns are selected, press pattern then press choose from 5 automatic length settings, without changing the stitch zigzag width or stitch length settings.
Page 138: Changing Thread Density (For Satin Stitch Patterns Only)
EDITING STITCH PATTERNS Changing Thread Density Returning to the Beginning of the (for Satin Stitch Patterns Only) Pattern When sewing character/decorative stitches, you After selecting the pattern, press to select can return to the beginning of the pattern after trial your preferred thread density.
Page 139: Checking The Image
EDITING STITCH PATTERNS Press the “Start/Stop” button to continue Press to display the enlarged image. sewing. Checking the Image You can display an approximate size image of the selected stitch pattern. You can also check and change the colors of the image on the screen. Press to view any part of the image that extends out of the viewable...
Page 140: Combining Stitch Patterns
COMBINING STITCH PATTERNS COMBINING STITCH PATTERNS You can combine many varieties of stitch patterns, such as character stitches, cross stitches or satin stitches. You can also combine stitch patterns of different sizes, mirror image stitch patterns, and others. Before Combining Single stitch sewing is automatically selected for sewing combined patterns.
Page 141 COMBINING STITCH PATTERNS Press Select → The display returns to the stitch selection screen. Press Press to sew the pattern continuously. Press to view the completed pattern (see page 127). Press Memo Patterns are deleted individually starting with the last pattern entered by pressing...
Page 142: Combining Large And Small Stitch Patterns
COMBINING STITCH PATTERNS Press to sew continuously. Combining Large and Small Stitch Patterns Example: → The entered pattern is repeated. Combining Horizontal Mirror Press Image Stitch Patterns → The large size stitch will be selected. Example: Press again, then press to select the small size.
Page 143: Combining Stitch Patterns Of Different Length
COMBINING STITCH PATTERNS Combining Stitch Patterns of Press Different Length Example: Press again, then press Press , then press once. → The pattern is flipped horizontally. → The length of the image is set to Press Select again, then press 3 times.
Page 144: Making Step Stitch Patterns (For 7Mm Satin Stitch Patterns Only)
COMBINING STITCH PATTERNS Example: Press Press Press → The entered pattern is repeated. Making Step Stitch Patterns (for 7mm Satin Stitch Patterns Only) You can use the keys with 7mm satin stitch patterns to create a step effect. → The next stitch pattern will move to the right. Stitch patterns sewn so that they create a step effect are called step stitch patterns.
Page 145: More Examples
COMBINING STITCH PATTERNS ■ More Examples Press → → → → Press → The next stitch pattern will move to the left. Press → → → → → Press → → → → → → Press → The entered pattern is repeated. →...
Page 146: Using The Memory Function
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Stitch Data Precautions Observe the following precautions when using stitch data other than that created and saved in this machine. ■ Types of Stitch Data that can be Used • In the Character/Decorative Stitch memory, only .pmu stitch data files can be used with this machine. Using data other than that created using this machine may cause the machine to malfunction.
Page 147: Trademarks
USING THE MEMORY FUNCTION ■ Trademarks • Secure Digital (SD) Card is a registered trademark or a trademark of SD Card Association. • CompactFlash is a registered trademark or a trademark of Sandisk Corporation. • Memory Stick is a registered trademark or a trademark of Sony Corporation. •...
Page 148: Saving Stitch Patterns In The Machine's Memory
USING THE MEMORY FUNCTION Press Saving Stitch Patterns in the Machine’s Memory Press to return to the original screen without saving. You can save often-used stitch patterns in the machine’s memory. The machine’s memory can hold up to 20 stitch patterns, each holding up to 70 entries per memory pocket.
Page 149 USING THE MEMORY FUNCTION Choose a stitch pattern to delete. Press Press so the pattern saved in that pocket If you decide not to delete the stitch pattern, press appears. Press if you decide not to delete the stitch pattern. →...
Page 150: Saving Stitch Patterns To Usb Media (Commercially Available)
USING THE MEMORY FUNCTION Insert the USB media into the USB port Saving Stitch Patterns to USB connector on the machine. Media (Commercially Available) When sending stitch patterns from the machine to USB media, plug the USB media into the machine’s USB port.
Page 151: Saving Stitch Patterns In The Computer
USING THE MEMORY FUNCTION Press Saving Stitch Patterns in the Computer Using the included USB cable, the machine can be connected to your computer, and the stitch patterns can be temporarily retrieved from and saved on your computer. Note • Do not turn the main power to OFF while the “Saving”...
Page 152: Retrieving Stitch Patterns From The Machine's Memory
USING THE MEMORY FUNCTION Select the stitch pattern’s .pmu file and Choose a stitch pattern to retrieve. copy the file to the computer. Press so the pattern saved in that pocket appears. Press to return to the original screen without saving. Note •...
Page 153: Recalling From Usb Media
USING THE MEMORY FUNCTION Press the key of the stitch pattern you want Recalling from USB Media to recall. You can recall a specific stitch pattern from either direct USB media or a folder in the USB media. If the stitch pattern is in a folder, check each folder to find the stitch pattern.
Page 154: Recalling From The Computer
USING THE MEMORY FUNCTION Press Recalling from the Computer Plug the USB cable connector into the corresponding USB connectors for the computer and for the machine (see page 139). On the computer, open “My Computer” then go to “Removable Disk”. →...
Page 155: Chapter 5 Embroidery
■ Selecting the length of JUMP STITCH not to trim ....176 Selecting Embroidery Patterns/Floral alphabet Patterns/ Adjusting the Embroidery Speed........176 Baby Lock Exclusive Embroidery Designs ....... 151 Changing the Thread Color Display.........177 Selecting Alphabet Character Patterns......152 Changing the Embroidery Frame Display......178 Selecting Frame Patterns..........
Page 156: Before Embroidering
BEFORE EMBROIDERING BEFORE EMBROIDERING Embroidery Step by Step Follow the steps below to prepare the machine for embroidery. Step 9 Step 6, 8 Step 3 Step 4 Step 1, 2 Step 5 Step 7 Step # Action Page Presser foot attachment Attach embroidery foot “W”.
Page 157: Attaching Embroidery Foot "W
BEFORE EMBROIDERING Push the black button on the presser foot Attaching Embroidery Foot “W” holder and remove the presser foot. CAUTION • When attaching a presser foot, always press on the screen. You may accidentally press the “Start/Stop” button and possibly cause injury.
Page 158: Attaching The Embroidery Unit
BEFORE EMBROIDERING Hold the embroidery foot in place with Note your right hand, and then use the included • You can also sew utility/decorative stitches screwdriver to securely tighten the presser with the embroidery unit attached. Set the foot holder screw. feed dog position switch on the embroidery unit to the appropriate setting.
Page 159: Removing The Embroidery Unit
BEFORE EMBROIDERING Insert the embroidery unit connection into the machine connection port. Push lightly Note until the unit clicks into place. • A confirmation message to lower the frame- securing lever after the carriage moves to its initial position. a Embroidery unit connection •...
Page 160 BEFORE EMBROIDERING Hold down the release button, and pull the embroidery unit away from the machine. a Release button CAUTION • Do not carry the embroidery unit by holding the release button compartment. • Be sure to close the cover of the connection port when the embroidery unit is not being used.
Page 161: Selecting Patterns
Patterns from an embroidery card (sold separately) f Patterns saved in the machine’s memory (see page 191) g Patterns saved in USB media (see page 191) h Patterns saved on the computer (see page 192) i Baby Lock Exclusive Embroidery Designs...
Page 162: Pattern Selection Screens
There are 5 categories of patterns in this machine. indicates that there is more than one pattern selection screen for that category. Embroidery patterns Alphabet characters Floral alphabet patterns Frame patterns Baby Lock Exclusive Embroidery Designs Flowers Borders Lace Occasions Appliqué...
Page 163: Selecting Embroidery Patterns/Floral Alphabet Patterns/Baby Lock Exclusive Embroidery Designs
Selecting Embroidery Patterns/ Floral alphabet Patterns/ pattern as needed. If you make a mistake selecting the pattern, press the Baby Lock Exclusive Embroidery key of the pattern you want to embroider. Designs Select the category of the pattern you want to embroider.
Page 164: Selecting Alphabet Character Patterns
SELECTING PATTERNS Press to change the Selecting Alphabet Character Patterns selection screen, and then enter the characters that you want to embroider. To enter a space, press Press If you want to change the size of a character, select Press the key of the font you want to the character and then press to change the embroider.
Page 165: Selecting Frame Patterns
SELECTING PATTERNS Press Selecting Frame Patterns Press Press the key of the frame shape you want to embroider in the top part of the screen. → The sewing screen is displayed. Proceed to see “VIEWING THE SEWING SCREEN” on page 155 to embroider the pattern.
Page 166: Selecting Patterns From Embroidery Cards
Follow the steps on page 151 to select a cannot be used with this machine. pattern. • Store embroidery cards in the hard case. • Please see your Baby Lock retailer for Selecting Patterns from USB embroidery cards available. media/Computer Note •...
Page 167: Viewing The Sewing Screen
VIEWING THE SEWING SCREEN VIEWING THE SEWING SCREEN a Shows the presser foot code. Attach embroidery foot “W” for all embroidery projects. When the foot presser symbol is displayed on the screen, you are able to sew. b Shows the boundary for embroidering with the extra large frame (30 cm × 18 cm (approx. 12 inches × 7 inches)). c Shows a preview of the selected pattern.
Page 168: Key Functions
VIEWING THE SEWING SCREEN ■ Key Functions Using these keys, you can change the size of the pattern, rotate the pattern, etc. Display Key Name Explanation Page Image key Press this key for a preview of the sewn image. Arrow keys Press an arrow key to move the pattern in the direction shown by the arrow.
Page 169: Preparing The Fabric
PREPARING THE FABRIC PREPARING THE FABRIC CAUTION • Use fabrics with a thickness of less than 3 mm (approx. 1/8 inch). Using fabrics thicker than 3 mm (approx. 1/8 inch) may cause the needle to break. • When using layers with thicker batting etc., you can sew more attractive embroidery by adjusting the embroidery presser foot height in the embroidery settings screen (see below).
Page 170: Hooping The Fabric In The Embroidery Frame
PREPARING THE FABRIC Hooping the Fabric in the Embroidery Frame ■ Types of Embroidery Frames Extra Large Large Medium Small Can embroider an area Can embroider an area Can embroider an area Can embroider an area 30 cm × 18 cm 18 cm ×...
Page 171: Inserting The Fabric
PREPARING THE FABRIC ■ Inserting the Fabric Slightly tighten the frame adjustment screw, and then remove the slack in the fabric by Note pulling on the edges and corners. Do not • If the fabric is placed loose in the embroidery loosen the screw.
Page 172: Embroidering Small Fabrics Or Fabric Edges
PREPARING THE FABRIC Return the frame adjustment screw to its Remove the embroidery sheet. initial position. ■ Using the Embroidery Sheet When you want to embroider the pattern in a Embroidering Small Fabrics or particular place, use the embroidery sheet with the frame.
Page 173: Embroidering Ribbons Or Tape
PREPARING THE FABRIC ■ Embroidering Ribbons or Tape Secure with double-sided tape or a temporary spray adhesive. a Ribbon or tape b Stabilizer...
Page 174: Attaching The Embroidery Frame
ATTACHING THE EMBROIDERY FRAME ATTACHING THE EMBROIDERY FRAME Note Wind and insert the bobbin before attaching the embroidery frame. Press the “Presser Foot Lifter” button to Lower the frame-securing lever to be level raise the presser foot. with the frame to secure the embroidery frame in the embroidery frame holder.
Page 175: Confirming The Pattern Position
CONFIRMING THE PATTERN POSITION CONFIRMING THE PATTERN POSITION The pattern is normally positioned in the center of the embroidery frame. You can check the layout before starting embroidery and change the position. Checking the Pattern Position From , press the key for the position The embroidery frame moves and shows the that you want to check.
Page 176: Previewing The Completed Pattern
CONFIRMING THE PATTERN POSITION Press to return to the original Previewing the Completed screen. Pattern Press → An image of the pattern as it will be embroidered appears. Press to select the frame used in the preview. Frames displayed in light gray cannot be selected. Press to see a full screen preview.
Page 177: Sewing An Embroidery Pattern
SEWING AN EMBROIDERY PATTERN SEWING AN EMBROIDERY PATTERN Sewing Attractive Finishes There are many factors that go into sewing beautiful embroidery. Using the appropriate stabilizer (see page 157) and hooping the fabric in the frame (see page 158) are two important factors mentioned earlier. Another important point is the appropriateness of the needle and thread being used.
Page 178: Sewing Embroidery Patterns
SEWING AN EMBROIDERY PATTERN Trim the excess thread at the start of the Sewing Embroidery Patterns color. If the end of the thread is under the presser foot, raise the presser foot, then trim the excess thread. Example: Press the “Start/Stop” button to start embroidering.
Page 179: When Threading Manually
SEWING AN EMBROIDERY PATTERN ■ When Threading Manually Repeat the same steps for embroidering the remaining colors. Thread the machine manually with the first color (see “Threading Manually” on page 31). Lower the presser foot, then press the “Start/Stop” button to start embroidering. After 5-6 stitches, press the “Start/Stop”...
Page 180: Sewing Embroidery Patterns Which Use Appliqué
SEWING AN EMBROIDERY PATTERN Remove the appliqué material from the Sewing Embroidery Patterns embroidery frame, and then cut carefully along the stitching. After cutting, remove all Which Use Appliqué of the stitching thread carefully. Carefully cut out the pattern on the outline you just There are some patterns which call for an appliqué...
Page 181 SEWING AN EMBROIDERY PATTERN Apply a thin layer of adhesive or spray adhesive to the back of the appliqué piece and attach it to the appliqué position so that it follows the seam of the outline. Memo If the appliqué material is a lightweight fabric, you may want to use a fusible web on the back to stabilize the fabric and for appliqué...
Page 182: Adjustments During The Embroidery Process
ADJUSTMENTS DURING THE EMBROIDERY PROCESS ADJUSTMENTS DURING THE EMBROIDERY PROCESS Note • Be careful not to bump the embroidery unit carriage or the presser foot when removing or attaching the embroidery frame. Otherwise, the pattern will not embroider correctly. Unlock the frame-securing lever and If the Bobbin Runs Out of Thread remove the embroidery frame.
Page 183: If The Thread Breaks During Sewing
ADJUSTMENTS DURING THE EMBROIDERY PROCESS Press to return to the original If the Thread Breaks During Sewing screen. Press the “Start/Stop” button to stop the Press the “Presser Foot Lifter” button to machine. lower the presser foot, and press the “Start/ Stop”...
Page 184: Automatically Resuming Embroidery When The Power Goes Off
ADJUSTMENTS DURING THE EMBROIDERY PROCESS Press the “Start/Stop” button to continue Automatically Resuming embroidering. Embroidery When the Power Goes Off The current color, stitch number and design position are saved when the power is interrupted during embroidering. The next time that the machine is turned on, you can resume embroidering.
Page 185: Manually Resuming Embroidery After Turning Off The Power
ADJUSTMENTS DURING THE EMBROIDERY PROCESS , or to advance the Manually Resuming Embroidery pattern to slightly before where sewing After Turning Off the Power stopped. Example: If the power is turned off while sewing the second color Select the pattern and press Press to return to the original screen.
Page 186: Making Embroidery Adjustments
MAKING EMBROIDERY ADJUSTMENTS MAKING EMBROIDERY ADJUSTMENTS Press Adjusting Thread Tension When embroidering, the thread tension should be set so that the upper thread can slightly be seen on the wrong side of the fabric. ■ Correct Thread Tension The pattern can be seen from the wrong side of the fabric.
Page 187: Using The Automatic Thread Cutting Function (End Color Trim)
MAKING EMBROIDERY ADJUSTMENTS Using the Automatic Thread Using the Thread Trimming Cutting Function Function (JUMP STITCH TRIM) (END COLOR TRIM) The thread trimming function will automatically trim any excess thread jumps within The automatic thread cutting function will the color. This function is initially turned on. To cut the thread at the end of sewing each color.
Page 188: Adjusting The Embroidery Speed
MAKING EMBROIDERY ADJUSTMENTS Press to turn off JUMP STITCH Adjusting the Embroidery Speed TRIM. Press and Embroidery. In the MAX EMBROIDERY SPEED display, to change the maximum embroidery speed. → The key will display as You can choose from 3 different speed levels. The machine will not trim the thread before moving to the next stitching.
Page 189: Changing The Thread Color Display
MAKING EMBROIDERY ADJUSTMENTS When the thread number #123 Changing the Thread Color Display displayed, use to select from six embroidery thread brands pictured below. You can display the name of the thread colors, the time or embroidery thread number. Memo Colors on the screen may vary slightly from actual spool colors.
Page 190: Changing The Embroidery Frame Display
MAKING EMBROIDERY ADJUSTMENTS Changing the Embroidery Frame Display Press Press In the FRAME DISPLAY, use change the embroidery frame display mode. There are 10 choices. a Extra large frame embroidering area b Center line c Large frame embroidering area d Medium frame embroidering area e Small frame embroidering area f Grid lines Press...
Page 191: Revising The Pattern
REVISING THE PATTERN REVISING THE PATTERN CAUTION • When you have revised the pattern, check the display of available embroidery frames and use an appropriate frame. If you use an embroidery frame not displayed as available for use, the presser foot may strike the frame and possibly cause injury.
Page 192: Aligning The Pattern And The Needle
REVISING THE PATTERN Aligning the Pattern and the Needle Example: Aligning the lower left side of a pattern and the needle Mark the embroidery start position on the fabric, as shown. Press...
Page 193: Changing The Size
REVISING THE PATTERN Select the direction in which to change the Press size. Press to enlarge the pattern proportionately. Press to shrink the pattern proportionately. Press to stretch the pattern horizontally. Press to compact the pattern horizontally. Press to stretch the pattern vertically. Press to compact the pattern vertically.
Page 194: Rotating The Pattern
REVISING THE PATTERN Select the angle of rotation for the pattern. Rotating the Pattern Press to rotate the pattern 90 degrees to the left. Press Press to rotate the pattern 90 degrees to the right. Press to rotate the pattern 10 degrees to the left.
Page 195: Creating A Horizontal Mirror Image
REVISING THE PATTERN Creating a Horizontal Mirror Changing the Density Image (Alphabet Character and Frame Patterns Only) Press so it appears as to create a The thread density for some alphabet character horizontal mirror image of the selected pattern. and frame patterns can be changed. Press again to return the pattern to normal.
Page 196: Changing The Colors Of Alphabet Character Patterns
REVISING THE PATTERN Change the density. Changing the Colors of Alphabet Press to make the pattern less dense. Character Patterns Press to make the pattern more dense. Combined alphabet character patterns can be sewn with each letter in a different color. If “MULTI COLOR”...
Page 197: Using The Memory Function
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Embroidery Data Precautions Observe the following precautions when using embroidery data other than that created and saved in this machine. CAUTION • When using embroidery data other than our original patterns, the thread or needle may break when sewing with a stitch density that is too fine or when sewing three or more overlapping stitches.
Page 198: Computers And Operating Systems With The Following Specifications Can Be Used
USING THE MEMORY FUNCTION ■ Computers and Operating Systems with the Following Specifications can be Used • Compatible models: IBM PC with a USB port as standard equipment IBM PC-compatible computer equipped with a USB port as standard equipment • Compatible operating systems: Microsoft Windows 98SE/Me/2000/XP (Windows 98SE requires a driver.
Page 199: Saving Embroidery Patterns In The Machine's Memory
USING THE MEMORY FUNCTION Press Saving Embroidery Patterns in the Machine’s Memory Press to return to the original screen without saving. You can save embroidery patterns that you have customized and will use often; for example, your name, patterns that have been rotated or had the size changed, patterns that have had the sewing position changed, etc.
Page 200 USING THE MEMORY FUNCTION Select the pattern you want to delete. Press If you decide not to delete the pattern, press Press → The “Saving” screen displays. When the pattern is saved, the display returns to the original screen automatically. Note •...
Page 201: Saving Embroidery Patterns To Usb Media (Commercially Available)
USING THE MEMORY FUNCTION Insert the USB media into the USB port Saving Embroidery Patterns to connector on the machine. USB Media (Commercially Available) When sending embroidery patterns from the machine to USB media, plug the USB media into the machine’s USB port. Depending on the type of USB media being used, either directly plug the USB device into the machine’s USB port or plug the USB Card Reader/Writer into the machine’s...
Page 202: Saving Embroidery Patterns In The Computer
USING THE MEMORY FUNCTION Press when the pattern you want to Saving Embroidery Patterns in the Computer save is in the sewing screen. Using the included USB cable, the machine can be connected to your computer, and the embroidery patterns can be temporarily retrieved from and saved in your computer.
Page 203: Retrieving Patterns From The Machine's Memory
USING THE MEMORY FUNCTION Press Retrieving Patterns from the Machine’s Memory Press → The sewing screen is displayed. Recalling from USB Media You can recall a specific embroidery pattern from → The machine displays the patterns currently in the either direct USB media or a folder in the USB memory.
Page 204: Recalling From The Computer
USING THE MEMORY FUNCTION Press when there is a subfolder to Press sort two or more stitch patterns to USB media, the embroidery pattern in the subfolder is displayed. Press to return to the original screen without recalling. → The sewing screen is displayed. Recalling from the Computer Plug the USB cable connector into the corresponding USB port connectors for the...
Page 205 USING THE MEMORY FUNCTION Move/copy the pattern data to “Removable Press the key of the pattern you want to Disk”. recall. Press to return to the original screen. → Pattern data in “Removable Disk” is written to the machine. Note •...
Page 206: Embroidery Applications
EMBROIDERY APPLICATIONS EMBROIDERY APPLICATIONS Apply a thin layer of fabric glue or a Using a Frame Pattern to Make temporary spray adhesive to the rear of the appliqué created in step . Attach the an Appliqué (1) appliqué to the base fabric matching the shapes.
Page 207: Using A Frame Pattern To Make An Appliqué (2)
EMBROIDERY APPLICATIONS Remove the embroidery frame from the Using a Frame Pattern to Make embroidery unit, and cut around the outside of the stitches. an Appliqué (2) This is a second method to make appliqué using embroidery patterns. You do not have to change the fabric in the embroidery frame using this method.
Page 208 EMBROIDERY APPLICATIONS...
Page 209: Chapter 6 Embroidery Edit
Chapter Embroidery Edit EXPLANATION OF FUNCTIONS............198 SELECTING PATTERNS TO EDIT ............199 Selecting Embroidery Patterns/Floral Alphabet Patterns/Frame Patterns/ Baby Lock Exclusive Embroidery Designs ..............200 Selecting Alphabet Character Patterns ..............200 EDITING PATTERNS................203 ■ Key Functions ........................204 Moving the Pattern....................205 Rotating the Pattern ....................205 Changing the Size of the Pattern ................206...
Page 210: Explanation Of Functions
EXPLANATION OF FUNCTIONS EXPLANATION OF FUNCTIONS With the Embroidery Edit functions, you can combine embroidery patterns and character patterns, change the size of patterns, rotate patterns, and perform many other editing functions. This machine can perform the 9 functions listed below. ■...
Page 211: Selecting Patterns To Edit
Patterns saved in the machine’s memory (see page 191) g Patterns saved in USB media (see page 191) h Patterns saved on the computer (see page 192) i Baby Lock Exclusive Embroidery Designs Memo See page 150 for more information on each category’s selection screen.
Page 212: Selecting Embroidery Patterns/Floral Alphabet Patterns/Frame Patterns/Baby Lock Exclusive Embroidery Designs
SELECTING PATTERNS TO EDIT Proceed to see “EDITING PATTERNS” on Selecting Embroidery Patterns/ page 203 to edit the pattern. Floral Alphabet Patterns/Frame Patterns/Baby Lock Exclusive Embroidery Designs Select the category of the pattern. Press the key of the pattern you want to edit.
Page 213 SELECTING PATTERNS TO EDIT Select the font, then enter the characters. Select the layout. (Example: (Example: A B C D) When selecting an arc, use See page 152 for more information about selecting characters. to change the degree of the arc. Press to make the arc flatter.
Page 214 SELECTING PATTERNS TO EDIT Press to return to the original screen. After you finish your selections, press → The embroidery edit screen will appear. Proceed to see “EDITING PATTERNS” on page 203 to edit the pattern.
Page 215: Editing Patterns
EDITING PATTERNS EDITING PATTERNS a Shows the size of the entire combined pattern. b Shows the size of the pattern currently selected. c Shows the distance from the center of the frame. d Shows the number of colors in the pattern currently selected. e Shows the degree of rotation for the pattern.
Page 216: Key Functions
EDITING PATTERNS ■ Key Functions Display Key Name Explanation Page Arrow keys Press these keys to move the pattern in the direction indicated by the arrow on Center key) the key. (Press to return the pattern to its original position.) Border key Press this key to make a repeating pattern.
Page 217: Moving The Pattern
EDITING PATTERNS Select the angle by which the pattern is Moving the Pattern rotated. Press to rotate the pattern 90 degrees to the Press to move the pattern in the direction left. Press to rotate the pattern 90 degrees to the shown on the key.
Page 218: Changing The Size Of The Pattern
EDITING PATTERNS Select the direction in which to change the Press to return to the original size. screen. Press to enlarge the pattern proportionately. Press to shrink the pattern proportionately. Press to stretch the pattern horizontally. Press to compact the pattern horizontally. Press to stretch the pattern vertically.
Page 219: Deleting The Pattern
EDITING PATTERNS Press the key of the layout you want to Deleting the Pattern embroider. See page 201 for more information about layout types. Press to delete the pattern from the screen. → The display will show the selected layout. Changing the Configuration of Press Alphabet Character Patterns...
Page 220: Reducing Character Spacing
EDITING PATTERNS to change the spacing. Reducing Character Spacing Press to widen the character spacing. The spacing between characters can be reduced to 50% of the narrowest character in the group. Press to tighten the character spacing. Press to return the pattern to its original Note appearance.
Page 221: Changing The Color Of Each Alphabet Character In A Pattern
EDITING PATTERNS Changing the Color of Each Changing the Thread Color Alphabet Character in a Pattern You can change the thread color by moving the color to be changed to the top of the sewing order and selecting a new color from the thread colors in Press so you can assign a thread the machine.
Page 222: Creating A Custom Thread Table
EDITING PATTERNS Press to choose a new Creating a Custom Thread Table color from the color palette. You can create a custom thread table containing To return to the original color, press . If the thread colors that you most often use. You can select thread colors from the machine’s extensive multiple colors have been changed, this command list of thread colors from nine different thread...
Page 223: Adding A Color To The Custom Thread Table From The List
EDITING PATTERNS Repeat the previous steps until all desired to select one of the thread thread colors are specified. brands in the machine. To delete a specified color from the palette, select the color and press Press to return to the original to enter a color’s 4-digit number.
Page 224: Choosing A Color From The Custom Thread Table
EDITING PATTERNS Press Press to put the color you want to change at the top of the sewing order. Repeat the previous steps until all desired thread colors are specified. To delete a specified color from the palette, press Press to return to the original screen.
Page 225: Designing Repeated Patterns
EDITING PATTERNS Press to choose a new Designing Repeated Patterns color from the custom thread table. ■ Sewing Repeated Patterns to scroll through the custom Using the border function, you can create stitches thread table. using repeated patterns. You can also adjust the spacing of the patterns within a repeated pattern Press to return to the original color.
Page 226 EDITING PATTERNS Select the direction in which the pattern Adjust the spacing of the repeated pattern. will be repeated. To widen spacing, press To tighten spacing, press a Vertical direction b Horizontal direction c Repeating and deleting keys Memo d Spacing keys You can only adjust the spacing of patterns →...
Page 227: Repeating One Element Of A Repeated Pattern
EDITING PATTERNS ■ Repeating One Element of a Press Repeated Pattern By using the Cut function, you can select one element of a repeated pattern and repeat only that single element. This function allows you to design complex repeated patterns. Choose the direction in which the repeated pattern will be cut.
Page 228: Assigning Thread Marks
EDITING PATTERNS ■ Assigning Thread Marks Repeat the selected element. By sewing thread marks, you can easily align Press to finish repeating. patterns when sewing a series. When sewing is finished on a pattern, a thread mark in the shape of an arrow will be sewn using the final thread.
Page 229: After Editing
EDITING PATTERNS After Editing Press to select the thread mark to Press be sewn. Memo • When there are two or more elements, use If you want to sew the pattern immediately, to select a press to call up the sewing screen. pattern that you want to assign a thread mark(s) to.
Page 230: Color Sorting Repeated Patterns
EDITING PATTERNS ■ Color Sorting Repeated Patterns Press to automatically change the sewing order of colors in combined border embroidery patterns so that the same color can be continuously sewn. This allows you to continue sewing without repeatedly changing the upper thread or changing the sewing order manually.
Page 231: Combining Patterns
COMBINING PATTERNS COMBINING PATTERNS Editing Combined Patterns to view P.4, then select Example: Combining alphabet characters with an embroidery pattern and editing Press to select an embroidery pattern. Press...
Page 232 COMBINING PATTERNS Press Select and enter “Sewing”. After selecting , press to change the character size to M, then enter the remaining characters. Press to enter the alphabet characters. → The characters you enter will be displayed in the center of the display. Press to move the characters.
Page 233 COMBINING PATTERNS Press to change the layout of the When all editing is finished, press characters. Press See page 207 for more information about changing the layout. Press to change the color of the characters. See page 209 for more information about changing the color.
Page 234: Sewing Combined Patterns
COMBINING PATTERNS ■ Selecting combined embroidery Sewing Combined Patterns patterns If multiple patterns have been combined, use Combined patterns will be embroidered in the to select the pattern to be edited. If a order they were entered. In this example, the embroidery order will be as follows: USB mouse is connected, the pattern can be selected by clicking it.
Page 235: Using The Memory Function
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION In the same way as embroidery patterns in Chapter 5, you can save and retrieve edited embroidery patterns to and from the machine’s memory, a personal computer, or USB media. Refer to the relevant sections in Chapter 5 on saving and retrieving embroidery patterns and follow the same procedures in order to save and retrieve edited embroidery patterns.
Page 236 USING THE MEMORY FUNCTION...
Page 237: Chapter 7 Appendix
Chapter Appendix CARE AND MAINTENANCE ..............226 Cleaning the LCD Screen ..................226 Cleaning the Machine Casing ................226 Cleaning the Race ....................226 Cleaning the Bobbin Case ..................227 ADJUSTING THE SCREEN ..............228 Screen Visibility is Low ..................228 Touch Panel is Malfunctioning ................228 TROUBLESHOOTING ...............230 ERROR MESSAGES................233 ■...
Page 238: Care And Maintenance
CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION • Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. Grasp the bobbin case, and then pull it out. Cleaning the LCD Screen If the screen is dirty, gently wipe it with a soft, dry cloth.
Page 239: Cleaning The Bobbin Case
CARE AND MAINTENANCE Insert the bobbin case so that the projection Cleaning the Bobbin Case on the bobbin case aligns with the spring. Thread wax and dust easily collect around the notch in the tension spring on the bobbin case, resulting in an incorrect thread tension.
Page 240: Adjusting The Screen
ADJUSTING THE SCREEN ADJUSTING THE SCREEN Screen Visibility is Low Touch Panel is Malfunctioning If the screen is difficult to see when you turn on If the screen does not respond correctly when you the power, follow the steps below. touch a key (the machine does not perform the operation or performs a different operation), follow Press your finger anywhere on the screen.
Page 241 ADJUSTING THE SCREEN Using the included touch pen, lightly touch the center of each +, in order from 1 to 5. If the buzzer sounds one time after you press number 5, the operation is finished. If the buzzer sounds twice, there was an error. In this case, repeat the steps above.
Page 242: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING If you have a minor problem with your sewing machine, check the following solutions. If the solutions suggested do not correct the problem, contact your authorized retailer. You can also press then for advice about minor sewing problems during sewing. Press at any time to return to the original screen.
Page 243 TROUBLESHOOTING Problem Cause Solution Page Cannot lower the Presser foot was raised using the “Presser Foot Press the “Presser Foot Lifter” button to lower presser foot with the Lifter” button. the presser foot. presser foot lever Thread tension is Upper threading is incorrect. Check the steps for threading the machine incorrect and rethread the machine.
Page 244 TROUBLESHOOTING Problem Cause Solution Page Needle breaks Needle is installed incorrectly. Reinstall the needle correctly. Needle clamp screw is not tightened. Tighten the needle clamp screw. Needle is turned or bent. Replace the needle. Using improper needle or thread for the Check the “Fabric/Thread/Needle selected fabric.
Page 245: Error Messages
ERROR MESSAGES ERROR MESSAGES If the machine is not properly set and the “Start/Stop” button or the “Reverse/Reinforcement Stitch” button is pressed, or if the operation procedure is incorrect, the machine does not start. An alarm sounds and an error message is displayed on the LCD. If an error message displays, follow the instructions in the message.
Page 246 ERROR MESSAGES This message is displayed when This message is displayed when the patterns you are editing take the embroidery unit is attached up too much memory, or if you and the power is turned on with are editing too many patterns for the needle in the down position.
Page 247 ERROR MESSAGES This message is displayed when This message is displayed when the machine is in embroidery the bobbin is being wound, and mode and the small frame is the motor locks because the attached, and the selected thread is tangled, etc. pattern does not fit in the small frame.
Page 248 ERROR MESSAGES This message is displayed when, This message is displayed when after selecting a pattern, the foot controller is pressed while the embroidery unit is attached and machine is set up for embroidering. is pressed and the pattern is about to be deleted. This message is displayed when This message is displayed when the speed control lever is set to...
Page 249 ERROR MESSAGES This message is displayed when This message is displayed while the “Start/Stop” button is pushed the USB media is transmitting. and the machine is in embroidery mode, but the embroidery unit is not attached. This message is displayed when This message is displayed when you try to recall or save a pattern the memory is full and a pattern...
Page 250: Alarm Sounds
ERROR MESSAGES This message is displayed when This message is displayed when the automatic needle threading replacing the embroidering button is pushed while twin bobbin thread. needle sewing is set. This confirmation message This message is displayed when appears after the machine is rotating a saved combined turned on and the carriage of the pattern in the Embroidery...
Page 251: Specifications
SPECIFICATIONS SPECIFICATIONS Item Specification 55.6 cm (W) × 30.5 cm (H) × 25.8 cm (D) (approx. Sewing Machine Dimensions 21-7/8 inches (W) × 12 inches (H) × 10-1/8 inches (D)) 58.2 cm (W) × 31.9 cm (H) × 28.4 cm (D) (approx. Case Dimensions 22-7/8 inches (W) ×...
Page 252: Upgrading Your Machine'ssoftware
UPGRADING YOUR MACHINE’S SOFTWARE UPGRADING YOUR MACHINE’S SOFTWARE You can use USB media or a computer to download software upgrades for your sewing machine. When an upgrade program is available on www.babylock.com, please download the files following the instructions on the web site and steps below. Memo •...
Page 253: Upgrade Procedure Using Computer
UPGRADING YOUR MACHINE’S SOFTWARE When the message disappears, press Upgrade Procedure Using Computer While pressing the “Automatic Threading” button, turn the main power to ON. → The following screen will appear on the LCD. Press → The upgrade file is downloaded. Note If an error occurs, a red text error message will appear.
Page 254 UPGRADING YOUR MACHINE’S SOFTWARE...
Page 255: Stitch Setting Chart
STITCH SETTING CHART STITCH SETTING CHART The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch widths, and whether or not the twin needle mode can be used. Stitch width Stitch length Presser foot Twin [mm (inch.)] [mm (inch.)] Stitch Stitch name...
Page 256 STITCH SETTING CHART Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Overcasting Reinforcing of light and medium 2.5 - 5.0 1.0 - 4.0 stitch weight fabrics (1/8) (3/32 - 3/16) (1/16) (1/16 - 3/16) Overcasting...
Page 257 STITCH SETTING CHART Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Quilting Quilting stitch for invisible appliqué 0.5 - 5.0 1.0 - 4.0 appliqué stitch or attaching binding (1/16) (1/64 - 3/16) (1/16)
Page 258 STITCH SETTING CHART Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Decorative Decorative stitching 0.0 - 7.0 1.0 - 4.0 stitch (3/16) (0 - 1/4) (1/16) (1/16 - 3/16) ( J ) Serpentine Decorative stitching and attaching...
Page 259 STITCH SETTING CHART Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Hemstitching Heirloom, decorative hems 1.5 - 7.0 1.5 - 4.0 (15/ (1/16 - 1/4) (1/8) (1/16 - 3/16) Hemstitching Heirloom, decorative hems 1.5 - 7.0...
Page 260 STITCH SETTING CHART Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Squared Heavy-duty buttonholes with 3.0 - 5.0 0.2 - 1.0 buttonhole vertical bar tacks (7/32) (1/8 - 3/16) (1/64) (1/64 - 1/16) Stretch...
Page 261 STITCH SETTING CHART Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Diagonally right For attaching appliqué on tubular up (Straight) pieces of fabric and mitering — — — —...
Page 262: Index
Index Index Combining Patterns character/decorative stitches ...........128 Accessories embroidery edit ...............219 included accessories ..............4 Cord guide bobbin cover ..............72 options ..................7 Crazy quilt ..................72 Accessory compartment ..............4 Custom Thread Table ............210 Adjustments Cut/Tension key ................174 screen ..................228 screen brightness .............
Page 263 Index carriage ..................3 carrying case ................4 Needle release button ..............3 changing the needle ..............39 Error messages ................233 changing the needle position ............ 65 Eyelet ..................109 fabric/thread/needle combinations ..........41 mode ..................11 twin needle ................34 Needle bar thread guides ..........2 Fabrics Needle clamp screw ...............
Page 264 Index utility stitches ................60 Upper threading Scallop stitches ................92 threading manually ..............31 Settings twin needle mode ..............34 automatic reinforcement stitching ..........51 using the “Automatic Threading” button ........29 automatic thread cutting ............52 using the spool net ..............36 display language ...............
Page 265 Index...
Page 268 English 882-S95 XE2638-001 Printed in Taiwan...

This manual is also suitable for:

Ellegante3 blg3

Baby Lock Ellegante2 BLG2-NZ Instruction And Reference Manual

Table of Contents

Chapter 1 Getting Ready

Chapter 2 Sewing Basics

Chapter 3 Utility Stitches

Chapter 4 Character/ Decorative Stitches

Chapter 5 Embroidery

Chapter 6 Embroidery Edit

Quick Links

Chapters

Related Manuals for Baby Lock Ellegante2 BLG2-NZ

Summary of Contents for Baby Lock Ellegante2 BLG2-NZ