Button Sewing - Baby Lock espire BLSR Instruction And Reference Manual

Button Sewing

Buttons with 2 or 4 holes can be sewn on.
Note
Make sure that the automatic thread cutting setting is not selected when sewing on buttons.
Stitch
Stitch Name
Key

Button sewing

a
Press .
→
automatically changes to
dogs are lowered.
Memo
When button sewing is selected,
b
Raise the presser foot lever.
c
Attach button fitting foot "M", slide the
button along the metal plate and into the
presser foot, and then lower the presser foot
lever.
a
b
a Button
b Metal plate
d
Turn the handwheel toward you to check that
the needle correctly goes into the holes of the
button without touching it.
CAUTION
• Make sure the needle does not strike the button
during sewing. The needle may break and cause
injury.
Presser
Applications
Foot
Attaching buttons
, and the feed
cannot be set.
Stitch width
[mm (inch)]
Auto Manual
3.5 2.5 - 4.5
(1/8) (3/32 - 3/16)
e
Gently hold the end of the upper thread, and
then start sewing.
* Once sewing is completed, the machine
automatically sews reinforcement stitches, then stops.
* If the automatic thread cutting setting is selected
before sewing, the machine will automatically cut
the thread at the end of stitching.
Note
• To attach the button more securely, repeat the
procedure.
• Adjust the stitch width to the distance between the
holes in the button.
f
With scissors, cut the upper and bobbin
threads at the beginning of the stitching, pull
the upper thread at the end of the stitching to
the wrong side of the fabric, and then tie it
with the bobbin thread.
Memo
If a different stitch is selected,
setting.
SEWING THE STITCHES
Stitch length
Twin
[mm (inch)]
Needle
Auto Manual
— — NO
returns to its original
3
95