Alarm - Baby Lock espire BLSR Instruction And Reference Manual

■ Alarm

If an incorrect operation is performed, the machine
beeps two or four times.
Memo
To turn the alarm on or off, press
For details, see page 22.
This message is displayed when
the machine is set for twin needle
sewing and a pattern that cannot
be sewn with the twin needle is
selected.
This message is displayed when
you try to sew with a stitch other
than a middle needle position stitch
while the single-hole needle plate
is installed.
This message is displayed when
the needle plate is removed with
the machine on.
This message is displayed when
the "Start/Stop" button, "Reverse/
Reinforcement Stitch" button, or
the "Thread Cutter" button is
pressed while the presser foot is
raised.
This message is displayed when
the "Start/Stop" button is pressed
while the sewing speed controller
is set to control the zigzag stitch
width.
.
ERROR MESSAGES
135
5