Alarm - Baby Lock Ellageo PLUS BLL2 Instruction And Reference Manual

ERROR MESSAGES
196
This message is displayed when a
button on the screen is pressed
while the needle is lowered.
This message is displayed when a
large-size embroidery pattern is
selected in Embroidery Edit mode.
This message is displayed when
you try to use incompatible media.
This message is displayed while
the USB media is transmitting.
This message is displayed when
you try to sew with a stitch other
than a middle needle position stitch
while the single-hole needle plate
is installed.

■ Alarm

If an incorrect operation is performed, the machine
beeps two or four times.
Memo
To turn the alarm on or off, press
details, see page 21.
This message is displayed when
the needle plate is removed with
the machine on or when the single-
hole needle plate is installed when
the machine is turned on in the
embroidery or embroidery edit
mode.
This message is displayed when
an error occurs with the USB
media.
This message is displayed when
you try to retrieve or save a pattern
while no USB media is loaded.
This message is displayed when
the "Start/Stop" button, "Reverse/
Reinforcement Stitch" button, or
the "Thread Cutter" button is
pressed while the presser foot and
the needle are raised.
This message is displayed when
the "Start/Stop" button is pressed
while the sewing speed controller
is set to control the zigzag stitch
width.
. For