Led Meanings For Supervisor Operation Without Message Status Active - Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Direct Station Selector
NOTE:
Fast flashing is applicable only to DSS buttons for individual extensions.
Slow flashing is applicable to DSS buttons for individual extensions, calling
group extensions, and line/trunk numbers.
Calling Group or CMS Supervisory Operation
A supervisor with a DLC switches from normal call handling to supervisor
operation by pressing the Feature button, dialing
button. The effect of pressing a DSS button while in supervisor operation is the
same as that described for normal call-handling operation. See
page 312
When the supervisory position is not in Message Status operation, the green LED
next to the Message Status button is off. The red LED next to each DSS button
for a calling group member's extension is used to monitor the availability of
members to take calls directed to the calling group.
In Release 6.1 and later systems, Calling Group and CMS Supervisor Operation
is only available for local extensions.
The meaning of the red LED associated with each group member is shown in
Table 14.
Table 14.

LED Meanings for Supervisor Operation without Message Status Active

Extension
LED Status Status
Off 0
On 2
Slow Flashing 1
NOTE:
The LEDs next to DSS buttons for all other types of extensions are always
off and have no meaning.
for additional information.
Meaning
The extension is signed out from the group, and the member
is unavailable to take calls.
The extension is signed into the group, and calls can be sent
to the member.
Used for CMS only; the extension is in the after-call work
state, and the group member is not available to take calls.
August 1998
, and pressing the Hold
"Group Calling" on
Issue 1
Page 226