Factory-Set Posted Messages And Their Codes - Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Labeling
Table 27.
Number
01
02
03
04
05
06
07
08
09
10
11–20
Considerations and Constraints
If a label is assigned to the extension, the MLX telephone user sees the label, the
extension number, and the posted message, for example,
extension, the telephone's extension number is displayed (instead of the user's
name), along with any posted messages. For example, an MLX display telephone
user sees
If labels have not been assigned to operator extensions, display telephone users
see
operator.
If labels have not been assigned to outside lines/trunks, display users see the
factory-set label,
outside call is made or received. With AT&T's INFO2 ANI service, another PRI
calling party number service, or a calling number identification service and 800
GS/LS-ID module (loop-start lines only), the information displayed also identifies
the number of the caller (MLX display telephones only).
NOTE:
The availability of the caller identification information may be limited by
local-serving (caller's) jurisdiction, availability, or central office equipment.
Programmed labels cannot be shown on nondisplay telephones or on
single-line telephones.

Factory-Set Posted Messages and Their Codes

Message
later systems, modifiable in earlier releases)
(modifiable)
(modifiable)
. If a label is not assigned to an extension and a caller dials that
and the operator's extension number when receiving a call from the
and the line/trunk number (such as
(not modifiable in Release 2.0 and
(modifiable)
(modifiable)
(modifiable)
(modifiable)
(modifiable)
(modifiable)
(modifiable)
, , ... (for customer-created messages)
2 7
.
Issue 1
August 1998
Page 402
), when an