MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Performing Centralized Telephone Programming
Performing Centralized Telephone
Programming
Centralized telephone programming allows you to program any feature that can
be programmed by individual telephone users or by operators. Certain features
can be copied from one extension to another in the system.
In addition, the following features can be programmed only by using centralized
programming:
• Barge-In
• Headset Hang Up
• Intercom buttons: all types (Key and Behind Switch mode only)
• System Access buttons: all types (Hybrid/PBX only)
• Service Observing button (Release 6.1 and later systems)
• If you are programming features onto a single telephone, see
"Programming Features onto a Single Telephone"
• If you are programming several telephones of the same type (that is, all
analog, all MLX, all MLS, or all ETR), see
Buttons"
later in this section.
• If you are copying outside line/trunk button assignments, pool dial-out code
restrictions (Hybrid/PBX only), and Night Service information (for operator
positions only), see
section.
From the centralized programming menu, you can perform centralized telephone
programming by using telephone programming codes or selecting features from
the List Feature menu. See
programming codes. For detailed information about the List Feature menu, see
"Using the List Feature Menu" in Chapter 4, "Centralized Telephone
Programming," in System Programming .
"Copying Line/Trunk Button Assignments"
"Features"
in Chapter 1 for a list of telephone
later in this section.
"Copying Feature and SA/ICOM
Issue 1
April 1999
48
later in this