Centralized Programming - Lucent Technologies MERLIN Plus Release 2 System Manual

Centralized Programming

DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
5-50 MERLIN Plus System Features
The Centralized Programming feature allows the system administrator the
convenience of programming features onto individual voice terminals directly
from the administrator/attendant console. In this way there is no need to go to
each voice terminal to do the programming. This feature is useful when the
administrator is assigning Ringing Options for incoming calls.
The system administrator must be certain that the appropriate feature buttons on
the voice terminals are accurately labeled.
The voice terminal being programmed must be idle. If the voice terminal is busy
or in program mode, the administrator hears a beep at the administrator/attendant
console, indicating that he or she cannot use this feature until the voice terminal
is idle again.
This feature cannot be used to program station 10.
The system administrator can use the Program Mode Lock feature to prevent
people within the system from changing programming assignments on their
voice terminals. (See "Program Mode Lock.")
If your responsibilities do not include system administration, skip this
information.
To program a feature onto a voice terminal from the administrator/attendant
console:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Touch the Auto Intercom button or dial the intercom number for the voice
2
terminal you want to program.
Touch Conference.
3
Green lights go on next to the line buttons of lines already assigned to the voice terminal.
Follow the same steps to program the feature that you would follow if you
4
were at the voice terminal.
When you are finished programming the features for that voice terminal,
5
touch Conference again.
Leave administration mode by sliding the T/P switch to the center position.
6
T P
Administer Conference
John 12
T P