Table 2-8. Adjunct Summary; Adapters And Adjuncts - AT&T MERLIN LEGEND Release 2.0 Equipment And Operations Manual

Hardware Components

Adapters and Adjuncts

This section describes auxiliary hardware for the communications system. It
includes adapters, adjuncts, and other accessories. The following table
provides information about the hardware components that can be used with the
system.

Table 2-8. Adjunct Summary

Equipment
Specifications
Alerts (AC)' Any audible or visual alert that operates External
on 20-30 Hz ringing signals.
Associated with a specific station
(supplemental alert) or works on a
programmed trunk port (external alert).
audible or visual alert that operates
Alerts (DC) Any
on 48-WC ringing signals.
Associated with a specific station
(supplemental alert) or works on a
programmed trunk port (external alert)
Answer/Record Industry-standard machine.
machine'
Low ringer equivalence (less than 0.15
or ≤ 1.0 total REN for T/R port)
Ability to recognize 600-ms disconnect
signal or other means of automatic
disconnect (such as voice reset
disconnect timer, fixed recording time).
Cordless Must have touch-tone dialing capability 5320 Cordless
Telephone' when connected via MFM; rotary or
touch-tone dialing can be used on T/R
port.
Single line
Must have touch-tone dialing capability
Credit Card
Verification
when connected via MFM: rotary or
Terminal' touch-tone dialing can be used on T/R
port.
Dial A device that requires contact closure
2
Dictation' 1 can be used on LS/GS line jack only
with UPAM.
2-28 Adapters and Adjuncts
LS or
GS/LS
Trunk
Jack
AT&T products
Ringer—Loud
External Ringer
2
Alert bell
Alert horn
Alert strobe
Alert chime
Alert deluxe horn
Alert switch
Model 1300
answering
machine
Model 1531
Remote Answering
System telephone
-
Telephone
5200 Cordless
Telephone
5500 Cordless
Telephone
Interface
T/R GPA
012 or
008 OPT MLX Analog
Station Station
Station
Jack Jack Jack
7
8
Continued on next page
SAA
Analog
Station
Jack