Service Center Calibration Or Repair - Fluke 744 User Manual

744
Users Manual
If the calibrator will not turn on, check for a dead
battery or unplugged battery eliminator. If the
calibrator is receiving power, the display flashes
when you turn it on. To see if the calibrator is
receiving power, cup your hands around the display
to shield it from ambient light, and watch the display
as you press the button. If there is a flash, but the
calibrator does not power up normally, have the
calibrator serviced.

Service Center Calibration or Repair

Calibration, repairs, or servicing not covered in this
manual should be performed only by qualified
service personnel. If the calibrator fails, check the
nickel-cadmium battery pack first, and replace it if
needed.
Verify that the calibrator is being operated in
accordance with the instructions in this manual. If the
calibrator is faulty, send a description of the failure
with the calibrator. Pressure modules do not need to
accompany the calibrator unless the module is faulty
also. Be sure to pack the calibrator securely, using
the original shipping container if it is available. Send
the equipment postage paid and insured, to the
nearest Service Center. (Refer to the list of Service
100
Centers which follows.) Fluke assumes no
responsibility for damage in transit.
A Fluke 744 calibrator covered by the warranty will
be promptly repaired or replaced (at Fluke's option)
and returned to you at no charge. See the back of
the title page for warranty terms. If the warranty
period has expired, the calibrator will be repaired and
returned for a fixed fee. If the calibrator or pressure
module is not covered under the warranty terms,
contact an authorized service center for a price quote
for repair.
To locate an authorized service center, call Fluke
using any of the phone numbers listed below, or visit
us on the World Wide Web: www.fluke.com
USA and Canada:
1-888-99-FLUKE (1-888-993-5853)
Europe: +31 402-678-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-356-5500
Or visit us on the World Wide Web: www.fluke.com