RS125
5.4.3.
ADJUSTING BEARING PLAY
•
Partially loosen the two screws that retain the top yoke.
•
Loosen and remove the top bush.
•
Tap lightly at the bottom end to knock out the top yoke
complete with handlebar and ignition switch/steering
lock.
•
Lean the top yoke forward (2); use a cloth to protect
the instrument panel.
•
Loosen the ring nut completely using a ring nut
wrench. Tighten the ring nut to the specified torque, so
as to take up play.
CHASSIS
5 - 33