RS125
4.3.2.
INSTALLING THE ENGINE INTO THE FRAME
•
Shift the engine in small motions until matching the
mounting holes perfectly.
•
Insert the upper screw with its washer and tighten the
nut (1).
•
Insert the upper screw with its washer and tighten the
nut.
•
Insert the rear lower screw with its washer and tighten
the nut.
WARNING
Have someone help you in positioning and
fastening the swinging arm.
•
Position the swinging arm on the frame.
•
Set the swinging arm in position so as to match the
holes and insert the pivot fully from the left side.
ENGINE
4 - 17