Integrated Peripherals - ECS G45T-M2 Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Onboard SATA Mode
Onboard LAN Function
Onboard LAN Boot ROM
Onboard AUDIO Function
Serial Port1 Address
Serial Port2 Address
OnBoard CIR Port
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
USB Functions
Legacy USB Support
: Move
F1: General Help
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
OnBoard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Serial Port1/2 Address (3F8/IRQ4 2F8/IRQ3)
Use this item to enable or disable the onboard COM1/2 serial port, and to assign a
port address.
OnBoard CIR Port (Disabled)
Use this item to enable or disable the OnBoard CIR Port.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Parallel Port Mode (Normal)
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).
Integrated Peripherals
Enhanced
Enabled
Disabled
Enabled
3F8&IRQ4
2F8/IRQ3
Disabled
378
Normal
IRQ7
Enabled
Enabled
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
Help Item
Options
Disabled
Compatible
Enhanced
35