Kodak Carousel 4200 Service Manual page 32

SERVICE MANUAL
hole FAN CAP
light image
[12] Manually move the CLAMP PAD ASSEMBLY until the TAB is in the NULL position.
A091_4027BCA
A091_4027BA
Warning
Dangerous Voltage
[13] Connect the main power.
Important
It is necessary to make a FAN COVER TOOL. See the Tools section.
[14] Install the FAN COVER TOOL over the FAN area and the LAMP MODULE. See the Tools section.
[15] Install and hold the AUTO FOCUS TARGET SLIDE TL-3002 until it is fully seated in the GATE MECHANISM.
32
FAN CAP
A091_4033GCA
A091_4033GA
light path
[11] Install the FAN CAP 232729 in the PHOTOCELL
HOUSING.
NULL position
TAB
CLAMP LEVER
PAD
18NOV97 – SM5440-1