Program Dial - Kyocera ECOSYS FS-3140MFP Operation Manual

Program Dial

You can register transmission requirements such as the other party to which you send originals and transmission time
as a program. After registration, you can recall transmission requirements only by pressing the program number. Also,
you can assign names to programs to make recalling programs easier and more convenient.
NOTE:
The copy function can be also registered to the program. Up to 3 programs including copying and sending
functions can be registered.
When user login has been enabled, only the administrator can register.
Registering Programs
Deleting Registration Contents
Using Program Dial
1
With transmission requirements to be registered are set,
press the Program key and hold it (2 seconds). The
program is registered to the key. When you press a
number where a program is already registered, proceed
to the next step.
2
Press the or
3
Press the OK key.
4
Press [Yes] (the Left Select key). The program is
registered, overwriting the previous one.
1
Press the Program key where a program you want to
delete is registered, and hold it (2 seconds).
2
Press the or
3
Press the OK key.
4
Press [Yes] (the Left Select key). The program is
deleted.
1
Press the Program key.
2
Place the originals.
NOTE:
You can also use the program you have called up to
change transmission requirements such as changing the
other party.
3
Press the Start key. Transmission begins.
4-32
FAX Operation (Advanced)
key to select [Overwrite].
key to select [Delete].