Kyocera ECOSYS FS-3140MFP Operation Manual page 34

Selecting the Resolution
FAX Resolution:
1 *200x100dpi Norm.
*********************
2
200x200dpi Fine
3
200x400dpi S.Fin
5
Select the resolution suitable for sending originals.
•200 × 100 dpi (Normal): when sending originals with
standard size characters
Typical character size: 10.5 point (example:
Resolution Resolution
•200 × 200 dpi (Fine): when sending originals with
relatively small characters and thin lines
Typical character size: 8 point (example:
Resolution
•200 × 400 dpi (Super Fine): when sending originals
with minute characters and lines
Typical character size: 6 point (example:
Resolution
•400 × 400 dpi (Ultra Fine): when sending originals with
minute characters and lines more finely
Typical character size: 6 point (example:
Resolution
NOTE:
The default setting is 200 × 100 dpi (Normal).
The higher the resolution, the clearer the image. However,
higher resolution also means longer send times. Normally,
400 × 400 dpi (Ultra Fine) is recommended.
The machine does not support resolution of 300 × 300 dpi
when sending faxes. If you have selected 300 × 300 dpi, the
machine sends faxes after lowering the resolution to 200 ×
200 dpi (Fine).
The scan resolution should be equal to or higher than the fax
resolution. If the selected resolutions are not in this condition,
the machine automatically adjusts the resolution and
changes the selection.
1 Press the Function Menu key.
2 Press the
3 Press the OK key.
4 Press the
a b
resolution.
5 Press the OK key.
3-6
)
)
)
)
or key to select [FAX Resolution].
or key to select the desired
FAX Operation (Basic)
Resolution
Resolution
Resolution