Kyocera ECOSYS FS-3140MFP Operation Manual page 77

Forwarding Settings
FAX > Common > Forward > Forward
Use this page to select forwarding destinations.
The settings available on the Forward page are shown below.
Item
File Format
FTP Encrypted TX
Subject Additional
Information
Page Separate
Forward Destination
Settings
Delete
After completing the settings, click Submit to save the settings.
Description
Choose either PDF or TIFF as the file format used for
storing forwarded files.
Turn On to enable encryption for transmission. Note the
SSL protocol must also be turned on.
When a forwarding address is specified as destination,
Sender Name or Sender FAX No./ Address is appended
at forwarding. When None, these will not be appended.
Choose whether pages are separated when faxes are
forwarded to a computer.
Displays the registered destinations. Click the checkboxes
for the destinations to be enabled so that they are ticked.
To change a destination, click the name of the destination
to be changed. The Forward - Edit page is displayed.
Change the destination information and click Submit.
To delete a destination, click the checkbox for the
destination to be deleted so that it is ticked and then click
Delete.
4-23
FAX Operation (Advanced)
4