Reset To Factory - LaCie 2big Spare Drive 2TB 3TB User Manual

LaCie 2big Network 2
User Manual

4.19. Reset to Factory

If for any reason you wish to reset your LaCie product to its out-of-
the-box state, follow this procedure:
CAUTION: Resetting the product will erase all Dashboard data
such as users, groups, shares, and settings.
CAUTION: After resetting to default, all files will be moved to a
folder called Recovery in Share
only to the administrator.
1. Make sure the product is turned OFF.
2. Press and hold down the front button. Without releasing the
front button, turn the product on by pressing the power switch
on the rear of the product.
3. The product will start up and the front LED will blink in a blue/
red color.
4. When the front LED becomes solid red, release the front button.
(The LED should become solid red about 10 seconds after you
turn on the product.) The front LED will become static blue.
5. Press the front button once to confirm reset. If any of the steps
are omitted, the product will boot normally without resetting.
• DESIGN BY NEIL POULTON
and so by default will be available
Administering Your LaCie 2big Network 2
page 63