Ups Management - LaCie 2big Spare Drive 2TB 3TB User Manual

LaCie 2big Network 2
User Manual

4.12.1. UPS Management

The 2big Network 2 supports UPS (uninterrupted power supply)
management. If you connect a supported UPS device to the 2big
Network 2's USB port, in the Dashboard you will see modifiable
parameters.
In the left-hand column, a bullet will indicate power supply status.
✦ If green, power is being supplied through the power cable.
✦ If gray, power is not being supplied through the power cable.
On the right, under the heading
choose a minimum percentage of battery power at which the 2big
Network 2 will automatically enter stand-by mode.
Below, in the case that battery power is completely drain and the
drive is automatically shut down, you can elect to have the drive
restarted once power has been restored.
NOTE: For a list of supported UPS devices, click the
UPS link.
• DESIGN BY NEIL POULTON
Battery threshold level (%), you can
Supported
Administering Your LaCie 2big Network 2
Fig. 66
page 50