Telephone operation
Making, answering and ending calls
making a call
To make a call:
1.
Press
pHONE/
-Or-
Press
/spEAKEr to use the speakerphone, then
wait for a dial tone.
2.
Use the dialing keys to enter the telephone number.
On-hook dialing (predialing):
1.
Use the dialing keys to enter the telephone number
(up to 30 digits).
•
Press and hold
dialing pause (a p appears).
•
Press
muTE
2.
Press
pHONE/
-Or-
/spEAKEr to call using the speakerphone.
Press
-Or-
Press and hold
notes:
•
Pressing
pHONE
affect the elapsed time.
•
When a handset is on a call, if another handset attempts to access the directory, speed dial
list or caller ID history, the screen shows NOT AvAILABLE AT THIs TImE.
Temporary ringer silencing
To silence the ringer temporarily on that handset only:
•
While the telephone is ringing, press
muTE/
DELETE
To silence the ringer temporarily on the telephone base:
While the telephone is ringing, press /-vOLumE on the
•
telephone base.
This turns off the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume.
note: Unless the ringer volume is turned off on that handset, each handset rings when there
is an incoming call.
, then wait for a dial tone.
FLAsH
/pAusE to insert a three-second
rEDIAL
/DELETE or
to call.
FLAsH
/CANCEL to return to idle mode.
OFF
/FLAsH to access services from your telephone service provider does not
.
/CANCEL to erase digits.
OFF
OFF/
16
PHONE
10:30
The screen displays the
elapsed time as you
talk (in hours, minutes and
seconds).
888-722-7702
or
CANCEL
0:01:30
888-722-7702
11/20
PM
RINGER MUTED