Power On/Power Off; Setup Using The Configuration Manager - Bosch VIP XD Installation And Operating Manual

VIP XD
4.3

Power On/Power Off

Power Supply
The VIP XD comes with a plug-in power supply unit (PSU) with four primary adapters and a
terminal block. The VIP XD does not have a power switch. The VIP XD is ready for operation as
soon as it is connected to the power supply.
CAUTION!
The VIP XD may only be operated using the supplied PSU with the correct primary adapter for
!
your power outlet.
Where necessary, use suitable equipment to ensure that the power supply is free from
interference such as voltage surges, spikes or voltage drops.
Do not connect the VIP XD to the power supply until all other connections have been made.
1.
2.
3.
Provided the network connection has been correctly made, the green L LED also lights up.
The flashing orange T LED indicates data traffic on the network.
4.4

Setup Using the Configuration Manager

The Configuration Manager program can be found on the product CD contained in the scope
of delivery. This program allows you to implement and set up new video servers in the
network quickly and conveniently.
NOTICE!
i
Using the Configuration Manager to set all parameters in the VIP XD is an alternative to
configuration by means of a Web browser, as described in chapter 5 of this manual.
Installing the Program
1.
2.
3.
Bosch Security Systems
Plug the terminal block with the PSU cable connected to it into the orange socket on the
VIP XD.
Ensure that the correct primary adapter is attached to the power supply unit and that a
suitable power outlet is available.
Plug the power supply unit into the grounded power outlet. The unit is ready for
operation as soon as the operating status LED stops flashing red during start-up and
lights up green.
Insert the CD into the computer's CD-ROM drive.
If the CD does not start automatically, open the Configuration Manager directory using
Windows Explorer and double-click Setup.exe.
Follow the on-screen instructions.
Installation and Operating Manual
Installation | en 19
DOC | V4.0 | 2009.06