Power On/Power Off; Setup Using Configuration Manager - Bosch VIP X1 XF Installation And Operating Manual

VIP X1 XF
4.4

Power On/Power Off

Power Supply
The VIP X1 XF does not have a power switch. Power is supplied via a separate unit. Connect
the VIP X1 XF to the power supply unit and plug this into the mains. The unit is now ready for
use. The VIP X1 XF does not come supplied with a power supply unit.
CAUTION!
Use only power supply units with UL approval and a power output according to LPS or
NEC Class 2.
Where necessary, use suitable equipment to ensure that the power supply is free from
interference such as voltage surges, spikes or voltage drops.
Do not connect the VIP X1 XF to the power supply until all other connections have been made.
1.
2.
Provided the network connection has been correctly made, the green ETH LED also lights up.
The lit orange ETH LED signals that data packets are being transmitted via the network.
4.5

Setup Using Configuration Manager

The Configuration Manager program can be found on the product CD contained in the scope
of delivery. This program allows you to implement and set up new video servers in the
network quickly and conveniently.
NOTICE!
Using Configuration Manager to set all parameters in the VIP X1 XF is an alternative to
configuration by means of a Web browser, as described in chapter 5 of this manual.
Installing the Program
1.
2.
3.
Bosch Sicherheitssysteme GmbH
Plug the terminal block with the PSU cable connected to it into the orange socket on the
VIP X1 XF.
Connect the power supply unit to the mains. The VIP X1 XF is ready for use as soon as the
POWER LED changes from a red light, indicating the start-up procedure, to a green light.
Insert the CD into the computer's CD-ROM drive.
If the CD does not start automatically, open the Configuration Manager directory using
Windows Explorer and double-click Setup.exe.
Follow the on-screen instructions.
Installation and Operating Manual
Installation | en 19
DOC | V4.1 | 2010.02