Installation; Preparations - Bosch VIP XD Installation And Operating Manual

VIP XD
4

Installation

4.1

Preparations

Thanks to its ultra-compact dimensions, the VIP XD is particularly well suited to installation in
cabinets or consoles where space is at a premium.
CAUTION!
The unit is intended for use indoors or in housings.
Select a suitable location for installation that guarantees to meet the environmental
!
conditions. The ambient temperature must be between 0 and +50 °C (+32 and +122 °F). The
relative humidity must not exceed 95%.
The VIP XD generates heat during operation, so you should ensure that there is adequate
ventilation and enough clearance between the unit and heat-sensitive objects or equipment.
Please ensure the following installation conditions:
–
–
–
–
–
–
Bosch Security Systems
Do not install the unit close to heaters or other heat sources. Avoid locations exposed to
direct sunlight.
Allow sufficient space for running cables.
Ensure that the unit has adequate ventilation.
When making connections, use only the cables supplied or use appropriate cables
immune to electromagnetic interference.
Position and run all cables so that they are protected from damage, and provide
adequate cable strain relief where needed.
Avoid impacts, blows and severe vibrations as these can irreparably damage the unit.
Installation and Operating Manual
Installation | en 15
DOC | V4.0 | 2009.06