Power On/Power Off; Setup Using Bosch Video Client - Bosch VIP-X1XF Installation And Operating Manual

20 en | Installation
4.4

Power on/Power off

Power supply
The VIP X1 XF does not have a power switch. Power is supplied via a separate unit. Connect
the VIP X1 XF to the power supply unit and plug this into the mains. The unit is now ready for
use. The VIP X1 XF does not come supplied with a power supply unit.
CAUTION!
Use only power supply units with UL approval and a power output according to LPS or
NEC Class 2.
Where necessary, use suitable equipment to ensure that the power supply is free from
interference such as voltage surges, spikes or voltage drops.
Do not connect the VIP X1 XF to the power supply until all other connections have been made.
1.
2.
Provided the network connection has been correctly made, the green LED (standard version:
ETH; Eco-version: LINK) also lights up. The lit orange LED (standard version: ETH; Eco-version:
ACT) signals that data packets are being transmitted via the network.
4.5

Setup using Bosch Video Client

The Bosch Video Client program can be found on the product CD supplied. This program
allows you to implement and set up the encoder in the network quickly and conveniently.
NOTICE!
Using Bosch Video Client to set all parameters in the VIP X1 XF is an alternative to
configuration by means of a Web browser, as described in chapter 5 of this manual.
Installing the program
1.
2.
3.
DOC | V4.54 | 2011.09
Standard version: plug the terminal block with the PSU cable connected to it into the
orange socket on the VIP X1 XF.
Eco-version: connect the power supply unit to the 12V DC socket on the VIP X1 XF. The
jack must fit a pin of 2 mm (0.079 in) in diameter (polarity:
Connect the power supply unit to the mains. The VIP X1 XF is ready for use as soon as the
POWER LED changes from a red light, indicating the start-up procedure, to a green light.
Insert the product disc into the optical drive of the PC;
– The installation program should start automatically.
If installation does not start automatically, locate the BVC_installer.exe file on the disk
and double-click it.
Follow the instructions on the screen to complete the installation.
Installation and Operating Manual
VIP X1 XF
).
Bosch Sicherheitssysteme GmbH