Date/Time - Bosch VIP XD Installation And Operating Manual

26 en | Configuration Using a Web Browser
Password
The VIP XD operates with two authorization levels: service and user.
The highest authorization level is service. After entering the correct password, you can access
all the functions of the VIP XD and change all configuration settings.
You can use the user authorization level to connect the unit to a sender in the network and to
disconnect it, but you cannot change the configuration.
You can define and change a password for each authorization level if you are logged in as
service or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
NOTICE!
i
A new password is only saved when you click the Set button. You should therefore click the
Set button immediately after entering and confirming a password.
5.5

Date/Time

Date format
Select your required date format.
Unit date / Unit time
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time.
1.
2.
Unit time zone
Select the time zone in which your system is located.
DOC | V4.0 | 2009.06
Enter the current date. Since the unit time is controlled by the internal clock, there is no
need to enter the day of the week – it is added automatically.
Enter the current time or click the Sync to PC button to copy your computer's system
time to the VIP XD.
Installation and Operating Manual
VIP XD
Bosch Security Systems