Changing A Volume's Write Mode; Modifying A Configuration File Currently Running - Neoware e140 - Thin Client User Manual

Changing a Volume's Write Mode

Modifying a Configuration File Currently Running

You can quickly change the write mode of a volume. Just double-
click on the name of the volume to display the
dialog, then click on the
Volume Mode
Change the
OK
and click . (For a description of the writing modes, refer to the
section "Volume Write Modes" on page 82.)
Admin
Note: If you select
computer you want to use in that mode is included in the list of
Admin computers on the
One of the most useful features of the Console is the ability to man-
age configuration files currently running, either on the local PC that
runs the Console (if this PC also acts as a Neoware Image Manager
server) or on remote Image Manager servers.
Nvdd Manager
Selecting
Manager
dialog. This enables you to connect to and manage Image
Manager servers directly.
Assigning Volumes to Clients
Parameters
tab.
Special clients
(or ) settings as required
Write mode
for the
Allowed Computers
Tools
in the menu will display the
Changing a Volume's Write Mode
Volume Properties
, make sure the client
tab.
Nvdd
75