Enabling Clients To Access Images; Tftp & Dhcp Server Configuration; Windows - Neoware e140 - Thin Client User Manual

TFTP & DHCP Server Configuration

Windows

Enabling Clients to
CHAPTER 5
Access Images
This chapter describes how to configure the network and clients so
that hard disk images can be accessed.
Before clients can access and boot from images on the Neoware
Image Manager server, your TFTP and DHCP server must be con-
figured to serve the Neoware Primary Bootstrap Loader file
to clients. This network boot program can be found in
ELdr.bin
the directory of the Neoware Image Manager distribution
Server
package (for instance
Manager_4.6\Server
1 If you are already using standard Windows 2000/2003 TFTPD
server, kill the TFTPD service (using the "Services" applet for
instance).
2
Locate the following registry entry to specify the directory
where the
mPXELdr.bin
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Ser-
vices\Tftpd\parameters\directory
Edit the
directory
served by TFTP, you will have to make sure that they are all in
the directory specified by this parameter.
3
Start the TFTPD service again.
Neoware Image Manager User Manual
C:\Program Files\Neoware\Image_
).
file will be located:
if required. If some other files are to be
mPX-
59