INSTALLATION INFORMATION
TOOLS AND PARTS
Gather the required tools and parts before
starting installation. Read and follow the in-
structions provided with any tools listed here.
Electric Models
•
Flat-blade screwdriver
•
#2 Phillips screwdriver
•
Adjustable wrench that opens to 1˝
(2.54 cm) or hex-head socket wrench (for
adjusting dryer feet)
•
Wire stripper (for U.S. only direct wire
installations)
•
Tin snips (new vent installations)
•
Level
•
Vent clamps
•
Caulking gun and compound (for installing
new exhaust vent)
•
Tape measure
Gas Models
•
8˝ or 10˝ pipe wrench
•
8˝ or 10˝ adjustable wrench (for gas con-
nections)
•
Flat-blade screwdriver
•
Adjustable wrench that opens to 1˝
(2.54 cm) or hex-head socket wrench (for
adjusting dryer feet)
•
1/4˝ nut driver or socket wrench
•
Level
•
Vent clamps
•
Knife
•
Pipe-joint compound resistant to LP gas
•
Caulking gun and compound (for installing
new exhaust vent)
•
Pliers
•
Tape measure
INSTALLATION INSTRUCTIONS
Parts supplied:
Remove parts package from dryer drum.
Check that all parts were included.
Parts needed:
Check local codes and with gas supplier.
Check existing gas supply, electrical supply
and venting. Read "Electrical Requirements,"
"Gas Supply Requirements" and "Venting Re-
quirements" before purchasing parts.
Mobile home installations require special
parts (listed following) that may be ordered by
calling the dealer from whom you purchased
your dryer. For further information, please re-
fer to the "Assistance or Service" section of
the "Use & Care Guide."
•
Mobile Home Installation Kit. Ask for Part
Number 346764.
•
Metal exhaust system hardware.
2-1
4 leveling legs