Maytag MED5800TW - Electric Dryer Technical Education page 44

9. To remove the control board:
a) Disconnect wire connectors PS01
through PS04 from the board termi-
nals.
b) Push the end of the locking tab stop
from against the control panel, press
down on the locking tabs, and remove
the control board from the holders.
Control Board
PS02
PS03
Push
PS01
PS04
Tab
Board Holder
10. To remove the timer:
a) Pull the knob off the timer.
b) Disconnect the wire connectors from
the timer terminals and electronic con-
trol board connector PT1.
c) Remove the two mounting screws
from the timer bracket and remove the
timer from the control panel.
BK (PT1)
VT (V)
Electronic Control
4-4
Screws
BK BU
Timer 3-Wire Connector
WH (W)