Maytag MED5800TW - Electric Dryer Technical Education page 43

6. To remove the DC motor and DC heater
relays:
a) Disconnect the wire connectors from
the relay terminals.
b) Loosen one screw, remove the other
screw, and remove the relay from the
control panel.
(2) RD-BK (DC Mtr.)
(2) RD-WH (DC Htr.)
DC Motor Relay
7. To remove the push to start switch:
a) Pull the knob off the switch.
b) Disconnect the wire connectors from
the switch terminals.
c) Push the locking tab toward the switch
and remove the switch from the con-
trol panel.
(2) BK
Tab
Push To Start Switch
(2) BU (DC Mtr.)
(2) RD (DC Htr.)
8.
4-3
d) Unsnap the push to start switch from
its holder and remove it.
Unsnap Push To Start Switch From Holder
To remove the AC heater relay:
a) Disconnect the wire connectors from
the relay terminals.
b) Loosen one screw, remove the other
screw, and remove the relay from the
control panel.
AC Heater
Relay
(2) BK
Continued on the next page.
Holder
(2) BR